Technical article 105259

What is the SCOhelp for Localization Support for SCO OpenServer 5.0.0?

OpenServer 5.0.0

Written · Last revised

Problem

What does the SCOhelp for Localization Support Supplement for SCO OpenServer 5.0.0 contain?

Solution

The attached cover letter describes SCOhelp related enhancements and corrections to known problems in SCO OpenServer Release 5.0.0, as well as the installation procedure for the SCOhelp for Localization Support Supplement for SCO OpenServer 5.0.0.

Dear SCO Customer,

The enclosed SCOhelp for Localization Support Supplement for SCO OpenServer Release 5.0.0 contains the following updates:

(1) A patch to SCOhelp to send the uncompressed size of the help file.
    The scohelp pages are stored compressed.  When the pages are delivered
    to the browser, the files are uncompressed, but the size reported to
    the browser is of the compressed file.  Hence, the browser only reads a
    subset of the entire HTML page.

(2) A patch to SCOhelp to correctly use the cgi-bin/man script. The cgi-bin program "man" does not work with Netscape Navigator. This patch corrects a problem with the httpd accept types.

Note: This supplement (patch id: rs.2.5.c) is intended only for SCO
      systems based on SCO OpenServer 5.0.0. It requires the following
      patches to be pre-installed to successfully install the SCOhelp
      Supplement.

Release Supplement 5.0.0d SCO Networking Supplement 1.0.0 (netms or net100)

SCO OpenServer 5.0.2 and SCO Internet FastStart 1.0 do not use this patch. These releases use the rs.3.11.a version of this patch.

INSTALLATION AND REMOVAL INSTRUCTIONS
Installing patches on SCO OpenServer 5.0.0 usually consists of two phases:
"Loading" and "Applying".  The instructions that follow enable you to
both install the patch from distribution media or media image, as well
as configure the patch to be installed from a remote SCO OpenServer 5.0.0
system over a TCP/IP network.
I. LOADING THE PATCH
1. Log in as root.

2. If you are installing this supplement from the SCO Internet Family CD media, skip this step and proceed to step 3.

If you are installing this supplement from a media image, there is a file called VOL.000.000. Copy the file to the /tmp directory.

# cp path_where_the_file_exists/VOL.000.000 /tmp
3. Execute the command:
# scoadmin software

or double click on the Software Manager icon on the desktop.

4. Pull down the "Software" menu and select "Patch Management-->Load Patch".

5. You will see the "Begin Load Patch" menu.  Be sure the
   local machine name is selected and choose "Continue".

6. You will see the "Select Media" menu.

a. If you are loading this supplement from SCO Internet Family CD disk media, select the appropriate CD disk drive and choose "Continue".

You will then see the "Select Patch-Product To Load on ... " menu. Select the patch called:

SCOhelp Supplement for Localization Support (version rs.2.5.c)
Proceed to step 7.
b. If you are loading the patch from a media image per step 2,
   pull down the "Media Device" menu and select "Media Images",
   then choose "Continue".  You will then see the "Enter Image
   Directory" menu.  Enter /tmp and choose "OK". You will see
   the "Load Patch Preference" menu.
Proceed to step 7.

7. Choose "Full" to load the patch.

8. You will see the "Load Patch Progress" window.  If the patch loads
   successfully, you will see a "Message" window which states "Load
   Patch complete".  Choose "OK".  You are then returned to the main
   Software Manager window.
9. To apply the patch now, continue with step 2 under section II,
   "Applying the Patch".  To exit the Software Manager now, select
   "Exit" from the "Host" menu.
II. APPLYING THE PATCH

1. Log in as root. Execute the command:

# scoadmin software

or double click on the Software Manager icon on the desktop.

2. If you are installing this supplement from CD disk media, skip this step and proceed to step 3.

If you are installing this supplement from a media image, there is a file called VOL.000.000. Copy the file to the /tmp directory.

# cp path_where_the_file_exists/VOL.000.000 /tmp
3. You will see the "Begin Apply Patch" menu.  Be sure that the local
   machine name is selected and choose "Continue".
4. You will see the "Select Media" menu. The "Hard Disk" menu item
   should already be selected.  Choose "Continue".

5. You will be presented with the "Select Patch-product to Apply" menu.

Highlight the "SCOhelp Supplement for Localization Support (version rs.2.5.c)" patch and then choose "Full" to continue.

6. You will see the "Apply Patch Progress" window as the system applies
   the patch.  If the patch applies successfully you will see a "Message"
   window which states "Apply Patch complete."  Choose "OK".  You are then
   returned to the main Software Manager window.

7. Exit the Software Manager by choosing "Exit" from the "Host" menu.

8. Log in as root on tty01, and shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, application of the patch is complete.

III. NOTES ON NETWORK INSTALLATION
To install the patch on other SCO OpenServer 5.0.0 machines over the
network, first load the patch as in section I above on a designated
installation server.  Then create the user "swadmin" on the installation
server.
When running the Software Manager on the system where the patch will be
installed, you will be prompted for the source location of the patch in
the "Begin Load Patch" window.  Be sure to choose "From Another Host"
during this phase.  You will need to provide the name of the installation
server, as well as the password of the "swadmin" user on the installation
server, to initiate the installation process.
IV. PATCH REMOVAL

NOTE: Patches must be rolled back in the reverse order in which they were installed, on a per-component basis.

1. Log in as root.
2. Execute the command:
# scoadmin software

or double click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Patch Management-->Rollback Patch".

4. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "Visual Tcl" and choose "Continue".

5. You will see the "Patch Selection" window. Make sure that the "SCOhelp Supplement WServer component" patch is selected, and choose "Continue".

6. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "SCOhelp Supplement WServer Component" patch.

7. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu.

8. Pull down the "Software" menu and select "Patch Management-->Rollback Patch".

9. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "Standard X Clients" and choose "Continue".

10. You will see the "Patch Selection" window. Make sure that the
    "SCOhelp Supplement BaseX component" patch is selected, and
    choose "Continue".
11. You will see the "Confirm Selected Patches" window. Choose "Rollback"
    to confirm removal of the "SCOhelp Supplement BaseX component"
    patch.

12. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu.

13. Pull down the "Software" menu and select "Patch Management-->Rollback Patch".

14. You will see the "Begin Rollback Patch" menu, and be asked to select
    patched software to rollback. Select "SCO UNIX System V Operating
    System" and choose "Continue".
15. You will see the "Patch Selection" window. Make sure that the
    "SCOhelp Supplement Unix Component" patch is selected, and
    choose "Continue".

16. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "SCOhelp Supplement Unix Component" patch.

17. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu.

18. Exit the Software Manager by choosing "Exit" from the "Host" menu.

19. Log in as root on tty01, and shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, rollback of the patch is complete.

20. To also unload the patch, making it no longer available to be applied,
    follow steps 1 through 19 in this section.  However, in step 3, 8, and
    13, choose:
"Patch Management-->Unload Patch"
instead of:
"Patch Management-->Rollback Patch"

If you have questions regarding this supplement, or the product on which it is installed, please contact your software supplier.

We appreciate your business.
SCO Support Services

From the Xinuos technical article database, record 105259. Reproduced with permission. The original is at www.sco.com/ta/105259, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.