Technical article 101590

What is the support status of IBM "EtherJet" network cards?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I don't see a driver for the IBM EtherJet network card in the Advanced Hardware Supplement (AHS) Release 5.2 or on SCO's bulletin board.

Solution

IBM originally was not planning an SCO driver for this network card, but has since developed a working solution for SCO systems. It is currently not available from SCO, but IBM's bulletin board will have the most recent release along with documentation and configuration information.

According to information provided by IBM, version 2.5 of the
driver will be the first publically available release.  Therefore,
look for release 2.5 or later on IBM's BBS.  Contact IBM for
further information.

After the driver and card are fully tested and supported by SCO, the driver is scheduled to become part of an AHS supplement.

NOTE:     The IBM 100/10 ISA Ethernet Adapter operates at either 100 Mbps
          or 10 Mbps in either full-duplex or half-duplex mode.  It follows
          the Fast Ethernet specification for 100-Mbps operation and
          functions in a variety of network configurations.

From the Xinuos technical article database, record 101590. Reproduced with permission. The original is at www.sco.com/ta/101590, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.