Technical article 110546

What issues are addressed by SLS APP607A, the Year 2000 Supplement for SCO ARCserve/Open 2.2.0k on SCO OpenServer?

OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

What issues are addressed by Support Level Supplement (SLS) APP607A, the Year 2000 Supplement for SCO ARCserve/Open 2.2.0k on SCO OpenServer?

Is there a Year 2000 (Y2K) patch for date problem associated with SCO ARCserve/Open?

Solution

SLS APP607A corrects all currently known Year 2000 problems found with SCO ARCserve/Open from Cheyenne Release 2.2.0k running on SCO OpenServer Release 5.0.2, 5.0.4, and 5.0.5.

Note that SLS APP607A is applicable to SCO ARCserve/Open from
Cheyenne Release 2.2.0k only.  Any earlier revisions of SCO
ARCserve/Open must first be upgraded to Release 2.2.0k before this
SLS can be applied.  See ta109464, "What is SCO ARCserve/Open from
Cheyenne Release 2.2.0k?" for details on obtaining and upgrading to
this release.

See the attached cover letter for more information about this SLS, including a list of specific problems addressed and installation instructions.

Dear SCO Customer,

Support Level Supplement (SLS) APP607A, the Year 2000 Supplement for SCO ARCserve/Open 2.2, corrects all currently-known year 2000 problems with SCO ARCserve/Open 2.2 running on OpenServer 5.0.2, 5.0.4, and 5.0.5.

Problems Addressed
------------------

1. Reports generated using the Report Manager GUI report all Y2K dates incorrectly:

When a report is generated, dates that are year 2000 or greater
are incorrectly displayed as: 100 (year 2000), 101 (year 2001),
102 (year 2002), and so on.  Depending on the version of the
operating system on which SCO ARCserve/Open is being run, the
year 2000 may also be displayed as a two-digit number of 69 or
greater.

The correct format for the dates should be 00 (year 2000), 01 (Year 2001), 02 (Year 2002), and so on.

2. Output from as_qmgr (command line) reports Y2K dates incorrectly:

When you run as_qmgr to list the jobs in the queue or to change
the date in which a job will run, year 2000 or greater dates are
displayed incorrectly.  They are displayed as described in problem
#1 above.

3. Autopilot labels tape incorrectly when year is 2000 or greater:

When autopilot labels a tape it includes the current date as part
of the label name.  When the year is 2000 or greater the date used
on the label is incorrect.  It uses dates as described in problem
#1 above.

4. Using the format tapes option in the Device Manager GUI to format a tape in a tape library displays incorrect expiration dates if the year is in the year 2000 or greater.

If you are using a changer or tape library and you choose to
format a tape, the default expiration date is not displayed
correctly is the year 2000 or greater.  This date is displayed
as described in problem #1.
Contents
--------
/usr/lib/ARCserve/aprocess
/usr/lib/ARCserve/as_backup
/usr/lib/ARCserve/dbserver
/usr/lib/ARCserve/dm
Software Notes and Recommendations
----------------------------------

SLS APP607A should only be installed on:

SCO ARCserve/Open 2.2.0k running on SCO OpenServer 5.0.2, 5.0.4, 5.0.5

Installation Instructions
-------------------------

1. Download the APP607A media image file (app607a.Z file), place the file in the /tmp directory, uncompress and rename the file by typing these commands:

uncompress /tmp/app607a.Z
mv /tmp/app607a /tmp/VOL.000.000

2. Log on to the local server as root and run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. For SCO OpenServer 5.0.4 or 5.0.5, pull down the "Software" menu and select "Install New".

For SCO OpenServer 5.0.2, pull down the "Software" menu and select "Patch Management --> Apply Patch".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. When prompted to select the media device:

If you are installing this SLS from media images, select "Media Images",
then "Continue".  When prompted for the "Image Directory", enter "/tmp"
(or the directory where you placed the VOL.000.000 file in step 1) and
then select "OK".
6. For SCO OpenServer 5.0.4 or 5.0.5, when prompted to select software
   to install, ensure that the "APP607A: Year 2000 Supplement for SCO
   ARCserve/Open 2.2" entry is highlighted.  Choose "Install".

For OpenServer 5.0.2, when prompted to select installation type, choose "Full".

7. Once the installation finishes, quit the Software Manager.  Installation
   of SLS APP607A is now complete.

8. You will need to restart the SCO ARCserve/Open daemons by running the following command as root:

# astart
Removal Instructions
--------------------
Note: Patches must be rolled back in the reverse order in which they were
installed on a per-component basis.  Hence, if the SLS APP607A patch is not
the most recent patch applied to the UNIX component of the product, you will
have to roll back all patches applied after the SLS APP607A patch prior to
rollback of the SLS APP607A patch.

If you ever want to remove the patch, take these steps:

I. Removing SLS APP607A from SCO OpenServer 5.0.4 or 5.0.5

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight APP607A: Year 2000 Supplement for SCO ARCserve/Open 2.2

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of SLS
   APP607A is now complete.

6. You will need to restart the SCO ARCserve/Open daemons by running the following command as root:

# astart
II. Removing SLS APP607A from SCO OpenServer 5.0.2
1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Patch Management-->Rollback Patch".

4. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to roll back. Select "SCO ARCserve/Open for SCO OpenServer Release 5" and choose "Continue".

5. You will see the "Patch Selection" window. Make sure that the "APP607A: Year 2000 Supplement for SCO ARCserve/Open 2.2" is selected, and choose "Continue".

6. You will see the "Confirm Selected Patches" window.  Choose "Rollback"
   to confirm removal of the "APP607A: Year 2000 Supplement for SCO
   ARCserve/Open 2.2".

7. You will see the "Rollback Progress" window, as the system performs the rollback of the patch.

8. You will need to restart the SCO ARCserve/Open daemons by running the following command as root:

# astart

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 110546. Reproduced with permission. The original is at www.sco.com/ta/110546, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.