Technical article 100034

What network protocols does SCO AFPS support?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

What network protocols are supported by the SCO Advanced File and Print Server product?

Solution

SCO AFPS supports two network protocol stacks, "TCP NetBIOS" (also known as TPI/NetBIOS) and "NetBEUI".

The SCO AFPS network stack for each protocol can be represented as follows:

+--------------------+          +---------------------+
    SCO AFPS                         SCO AFPS
+--------------------+          +---------------------+
    OpenServer 5.0                   OpenServer 5.0
++++++++++++++++++++++          +++++++++++++++++++++++
     TPI/NetBIOS                        NetBEUI
+--------------------+          +---------------------+
        TCP                             Datalink
+--------------------+          +---------------------+
        IP                              DLPI
+--------------------+          +=====================+
        DLPI                       Physical LAN Card
+====================+          +---------------------+
   Physical LAN Card                       |
+--------------------+                     |
           |                               |
           |                               |
To Physical Network                   LAN Only
      LAN / WAN

TPI NetBIOS is a component part of the SCO OpenServer 5.0 TCP/IP network product which itself is an integral component of the SCO OpenServer 5.0 operating system (Enterprise only). In contrast, the NetBEUI and the Datalink product is a component of the SCO AFPS product.

TPI/NetBIOS uses the TCP/IP network protocol, which is routable, so that NetBIOS packets may be routed over subnet boundaries in an IP network. Routing enables data packets to be passed or routed from one workstation to another when they exist on different sides of a physical router, that is, they exist in different networks or they have different network addresses. The NetBEUI protocol, in contrast, is not a routable network protocol. It has no way of knowing if a particular workstation is local or remote, and thus is limited to a LAN environment. However, NetBEUI does support Token Ring Source Routing when used in a Bridged Token Ring (or IEEE 802.5) network, or to be more accurate, the Token Passing Ring media access control method (MAC). This allows data frames to be passed from one work- station to another on a ring connected up to thirteen rings away. Token Ring source routing is implemented in the network card driver, or the DLPI (Data Link Provider Interface). NetBEUI is also supported using an Ethernet II DIX (as opposed to IEEE 802.3 CSMA/CD) media access control method or frame type LAN.

See also

SCO Advanced File and Print Server Administrators Handbook, Chapter 7, "Monitoring and tuning the network".

dlpid(ADM) netbios(ADMP)

From the Xinuos technical article database, record 100034. Reproduced with permission. The original is at www.sco.com/ta/100034, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.