Problem
Under SCO OpenServer Release 5.0.5, I am experiencing problems with either the kernel and SMP portions of the operating system, or am havings problems or panics with the apic driver.
Solution
Support Level Supplement (SLS) OSS491A, the Kernel and SMP Supplement for SCO OpenServer Release 5.0.5, contains solutions to specific problems identified with the kernel and SMP portions of OpenServer Release 5.0.5, including security issues and problems with the apic driver.
See also
ta110105, "What is SLS OSS497C, the Core OS Supplement for SCO OpenServer Release 5.0.5?"
ta109909, "What is Release Supplement 505A for SCO OpenServer Release 5.0.5?"
Dear SCO Customer,Support Level Supplement (SLS) OSS491A, the Kernel and SMP Supplement for
SCO OpenServer Release 5.0.5, corrects a number of known problems with the
operating system. The issues addressed are:1. Scripts installed in /etc/idrc.d do not get run and some
scripts in /etc/idrc.d cause /etc/rc2 to hang.2. /etc/idsd.d does not get created during installation.3. Security problems exist with /bin/login, /bin/hello,
/usr/bin/mscreen, /usr/bin/ordist, /usr/bin/sd, and
/usr/bin/undelete.4. numlock/capslock anomalies exist in scoterm.5. hpnptyd runs in an endless loop.6. There is a panic in the polltime() routine.7. There is a lock timeout panic in doflush().8. There are problems in the apic driver with sharing of
interrupts. The system would not complete its startup
sequence, hanging at the letter 'G'.9. The apic driver panics with the message, "Not all CPUs have initialized their interrupt controllers."
10. There is a lock timeout panic in sptfree().
OSS491A contains:/bin/hello
/bin/login
/etc/conf/pack.d/apic/Driver.o
/etc/conf/pack.d/crllry/Driver.a (module mppic.o)
/etc/conf/pack.d/kernel/os.a (modules page.o, valloc.o, and kma.o)
/etc/conf/pack.d/kernel/io.a (module xmap.o)
/etc/conf/pack.d/mpsw/Driver.o
/etc/conf/pack.d/spt/Driver.o
/usr/bin/mscreen
/usr/bin/undeleteNote: The following user-configurable files are replaced during installation
of oss491a. The original versions of these files will be stored in
/usr/lib/custom/oss491a.sav. If you have made any custom modifications
to these files, you will need to make those changes to the new versions
of these files.Files replaced:/etc/rc2
/etc/conf/pack.d/str/space.cNote: The following warning message:WARNING: differing CPUS don't chain interrupts togetherindicates that at least one of the devices sharing interrupts will
not work. This is to be expected when a system has multiple devices
requiring an interrupt.Software Notes and Recommendations
----------------------------------SLS OSS491A should only be installed on these releases:
SCO OpenServer Enterprise System Release 5.0.5 SCO OpenServer Host System Release 5.0.5 SCO OpenServer Desktop System Release 5.0.5
Note that SLS OSS491A is included in Release Supplement 505A (rs505a).
Testing of the modified software contained in this SLS has been
conducted only to the extent necessary to confirm that it resolves
the problem stated above. Such testing consists of re-creating
the problem conditions (typically in an SCO test laboratory) and
verifying that the problem no longer occurs. No other testing of
this software has been done.Hardware Notes and Recommendations
----------------------------------This SLS is intended for i486, Pentium, Pentium Pro, Pentium II, and compatible CPUs.
Installation Instructions
-------------------------1. Prepare the media for installation.Download the OSS491A media image file (oss491a.Z file), place the file in the /tmp directory, uncompress and rename the file by typing these commands:
uncompress /tmp/oss491a.Z
mv /tmp/oss491a /tmp/VOL.000.0002. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Install New".
4. When prompted for which host to install from, choose the local machine and then "Continue".
5. When prompted to select the media device:
If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.
If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue". When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1) and then select "OK".6. When prompted to select software to install, ensure that the "OSS491A" entry is highlighted. Choose "Install".
7. Once the installation finishes, quit the Software Manager. Installation
of SLS OSS491A is now complete. The changes will take effect the next
time you reboot the system.8. Log in as root on tty01, and shut down the system:
# shutdown -g0 -yAfter shutting down and rebooting the machine, application of the SLS is complete.
Removal Instructions
--------------------Notes: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
After removing SLS OSS491A, the Software Manager may produce a "verification error" due to an unexpected checksum on file "io.a". This warning can be safely ignored.
1. Log in as root.2. Execute the command:# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Highlight "OSS491A: The Networking and SMP Supplement".
4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager.
6. As root on tty01, shut down the system:
# shutdown -g0 -yAfter shutting down and rebooting the machine, application of the SLS is complete.
If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.