Problem
The Network Configuration Manager can fail when attempting to add
or modify an IPX/SPX protocol stack. The following error message
occurs:Fatal error: floating-point value too large to represent. Error Information logged to: /tmp/tclerror.<no>.log. Press Enter to continue
Cause
This problem is seen when an IPX/SPX network number (internal or external) similar to the following is used:
1e1000This is due to the Network Configuration Manager interpreting the
network number as a floating point number. This is caused by the
letter 'e' or 'E' within the number. The number should be seen as
a valid hexadecimal number. Numbers containing the letters 'a',
'b', 'c', 'd', and 'f' do not cause this problem. Solution
When configuring the IPX/SPX protocol with the Network Configuration Manager, specify an IPX/SPX network number that does not contain the letter 'e'.
It is then possible to edit the following file manually to replace the selected network number with the required network number containing the letter 'e':
/etc/ipx.d/NPSConfigAn example of the fields which may need editing are:
internal_network = "1e10000" # The Internal Network Numberlan_1_network = "1e20000" # The External Network NumberIf the IPX/SPX stack has been newly configured before editing NPSConfig, the kernel will need to be relinked and the system rebooted.
If an existing IPX/SPX stack has been modified by making a change to NPSConfig, the IPX/SPX protocol will only need to be restarted.
See also
netconfig(ADM); ipx(PADM)