Problem
The slattach command, used to manually start a slip connection, dies if it receives a SIGINT from the controlling tty. Usually this happens because the delete <Del> key is pressed.
Solution
To work around this, use the setpgrp(C) command to detach slattach
from the process group. slattach will then run with the serial
port (for example, tty1A) as its controlling terminal and should
be unaffected by SIGINTs from any users.Here is an example of this workaround:
setpgrp slattach -v /dev/tty1a 132.147.102.34 132.147.102.33 255.255.255.0 9600&