Problem
During the installation of SCO OpenServer 5.0.4, it terminates prematurely with the following message:
Reading from Install Source: 10 KB/ramFS/extractProd/extractAll terminated by signal 8 Press <Enter> to continue
Solution
Installation must begin with the N1 diskette from the Compaq EFS. The latest EFS, currently EFS 5.15, should be used.
At the Boot: prompt, type "link" (without the quotes).
When prompted for what driver to install, enter "CUCHA" (without the quotes).
Follow the installation program instructions, with the following exception:
After loading the CUCHA driver from the BTLD diskette, you
will be prompted for the boot disk again. Do NOT reinsert
the N1 diskette from the EFS. Instead, use the original boot
disk from the SCO installation media.Proceed with the installation.NOTES: If other drivers are required for installation, in addition to the CUCHA driver, add them when prompted. For any additional driver, use quotes separated by whitespace, for example:
What drivers do you wish to link into the kernel?
"CUCHA CUIDA"