Technical article 109883

When installing OpenServer 5.0.4 or 5.0.5 it hangs at letter f pnpinit.

OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

When installing or updating to SCO OpenServer 5.0.4 or 5.0.5, the boot from installation floppy stalls at letter f pnpinit.

Solution

As a solution, the bootstring:
Boot: defbootstr pnp.disable

may be used to disable the Plug and Play driver.

After Initial System Load, if the PnP driver continues to be a problem, then boot from the system hard drive with the above bootstring. Add the pnp.disable option to the DEFBOOTSTR= line in /etc/default/boot.

Another option is to disable the PnP driver in /etc/conf/sdevice.d/pnp. To do this, edit the PnP file and change the "Y" in the first column to an "N". Then, relink the kernel so the PnP driver is absent from the next booted kernel.

See also

ta105937, "SCO OpenServer 5.0.4 installation bootstring options."

From the Xinuos technical article database, record 109883. Reproduced with permission. The original is at www.sco.com/ta/109883, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.