Technical article 117766

When installing rs506a on a system that uses the LSI/Symbios SLHA driver, the kernel will fail to re-link.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

When I install the OpenServer 5.0.6a Release Supplement onto a system that is using the LSI/Symbios SLHA driver, the kernel fails to relink at the end of the install-process. The error message seen is that a variable numHBAs is multiply defined - first defined in the slha Driver.o file.

Solution

The solution is to re-install the SLHA driver from a boot time loadable driver (BTLD)floppy-disk:

Take the BTLD used to install the original system and mount it using:

mount -r /dev/fd0135ds18 /mnt
Then type:
btldinstall /mnt

and choose the SLHA driver. Re-link the kernel manually using:

/etc/conf/cf.d/link_unix -y
and reboot.

The problem has been reported to SCO Engineering.

From the Xinuos technical article database, record 117766. Reproduced with permission. The original is at www.sco.com/ta/117766, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.