Technical article 105534

Where is the correct driver for the ATI 3D XPRESSION+ Video adapter?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I have configured my system via scoadmin video to use the
ATI Mach64PCI driver from the SCO AHS 5.2.  After reboot,
when scologin tries to start, the system panics with a fatal
server error and/or bus panic at cxm init.

The SCO online Compatible Hardware Web Page erroneously lists this card as fully supported with no supplement needed.

Solution

The correct driver to use for this card is not in AHS 5.2. The following driver from the SCO bulletin board is known to work with this adapter:

ftp.sco.COM://pub/drivers/OSR500-OSR502/graphics/m64

From the Xinuos technical article database, record 105534. Reproduced with permission. The original is at www.sco.com/ta/105534, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.