Problem
I wish to connect my local OpenServer 5 system to a remote LAN, using an ISDN device. Which ISDN device should I use?
Solution
The best ISDN device to use is one that is tested and approved for usage on an OpenServer 5 system.
To check which devices are approved for usage for OpenServer, SCO maintain a set of pages on the website, located at:
http://www.sco.com/supportOn this page there is a link "Compatible Hardware", which you should select, or you can use the following URL that will take you to the compatible hardware pages directly:
http://wdb1.sco.com/chwp/owa/hch_search_formThe first of the compatible hardware pages contains a method of refining the search of all the hardware that is listed on the pages.
The default action is to search for all hardware for a specific SCO operating system. You can change this by selecting one of the other options if you would prefer to search for hardware in a different manner.
Using the down arrows next to the selection boxes, you should select OpenServer 5 for the product and then Network Devices and Solutions for the product category.
Click on "Next" to continue the search.
If you have no particular make of adapter in mind, then leave the
first "corporation" option set to "ALL" If you have a particular
manufacturer in mind, select the manufacturer of your choice from
the list.If the manufacturer you are looking for is not listed in the drop-down list, then that means that they are not a certified manufacturer for ISDN devices under OpenServer.
Choose ISDN from the "Adapter Type" list.
Press "Next"When the page refreshes, the list of all the certified ISDN adapters
are listed. For each listed adapter, you will see a support status
listed under the operating system version.If you should find that the support status is blank, then the device
has not been tested for the above version of OpenServer, and should
not be used. If you would like to use a particular ISDN device that
is not tested on your version of OpenServer, or the manufacturer is
not listed then you may contact SCO Engineering Services using:certified@sco.comPlease use the following URL for more information regarding SCO Engineering Services:
http://www.sco.com/support/programs/developer/hw_cert.htmlOnce installed, the ISDN device can be configured to use PPP by using
scoadmin. Your system must have the PPP package installed first.