Technical article 101584

Which network card drivers support the net.param boot command in OpenServer 5?

OpenServer 5.0.0

Written · Last revised

Problem

The net.param boot command can be entered at boot time (or put
in /etc/default/boot) to override a network driver's configuration
for its network card.  An example of this is:
net.param=(io:0x240,irq:3,mem:0xa0000,msz:32)
where:
io  = I/O address
irq = IRQ line
mem = shared memory address
msz = memory size (in K)

This is most commonly used during a network installation, and is placed in /etc/default/boot on the network install floppy by netisl(ADM).

However, not all of the network card drivers support this boot
command.  Is there a list of those that do?

Solution

The following network drivers support the net.param boot command:

e3B    - 3Com 3c503
e3C    - 3Com 3c523
e3D    - 3Com 3c507
exos   - EXOS 205/205T
pnt    - AMD PCNet-ISA/ISA+/32
wdn    - Western Digital 8003/8013

See also

netisl(ADM)

From the Xinuos technical article database, record 101584. Reproduced with permission. The original is at www.sco.com/ta/101584, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.