Technical article 114602

After upgrading, changes previously made to /etc/ftpaccess are not being recognized.

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

After installing rs506a, changes made to /etc/ftpaccess are not being recognized.

Cause

Prior to rs506a, the default for ftpd startup was with the "-a" flag which would source the ftpaccess file. With rs506a, the default is now "-A" which ignores the ftpaccess file.

Solution

If you wish to have /etc/ftpaccess read, do the following:

1. Use your favorite text editor to edit /etc/inetd.conf and change the following line

From:
ftp     stream  tcp     nowait  root    /etc/ftpd       ftpd
To:
ftp     stream  tcp     nowait  root    /etc/ftpd       ftpd -a

2. Signal inetd to reread its configuration file.

Run the following as root:
# ps -ef |grep inetd                          // to find the PID of inetd
# kill -1  PID_of_inetd
NOTE:     FTP server (Version wu-2.6.2(1) default is -A , so -a is still
          needed to read /etc/ftpaccess in later versions of OpenServer 5.

See also

ta113341, " What problems are fixed in Release Supplement 506a for SCO OpenServer Release 5.0.6?"

From the Xinuos technical article database, record 114602. Reproduced with permission. The original is at www.sco.com/ta/114602, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.