Technical article 127735

What is the Vmtools version 2010.03.20Cb for OpenServer 5.0.7V?

OpenServer 5.0.7

Written

Problem

What problems are fixed by Vmtools version 2010.03.20Cb?

Solution

Vmtools release 2010.03.20Cb fixes the following problems on OSR507V Version 3:

1. Previous versions of the open-vm-tools (vmtools) on OpenServer
   5.0.7V would execute an /etc/reboot command when "Restart Guest"
   was selected from the "Power" menu.  Essentially the equivalent
   of a hardware reset and avoiding normal shutdown processing,
   this could potentially corrupt user data.

Vmtoolsd version 2010.03.20Cb, will now issue a "shutdown -i6 -g0" command when the "Restart Guest" is selected; normal shutdown processing is done before the reboot.

2. Messages from any additional processing a user may have added to
   the /etc/shutdown command would normally be displayed on
   the console.  If the shutdown command is issued by the vmtoolsd
   daemon, that output would be redirected to vmtoolsd's stdout
   or stderr which defaults to /dev/null.

The vmtoolsd in release 2010.03.20Cb has been modified to redirect any shutdown command processing back to the console and correctly handle CR/LF in the display.

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer Release 5.0.7V Version 3.0.0
----------------------------------------------------------
I. Software Notes and Recommendations

1. If you have any questions concerning this update, please contact your SCO software supplier or your SCO Support Representative.

2. UnXis strongly recommends that all customers remain current with the latest updates and critical patches to both their OSR507V virtual machine and their VM hypervisor of choice.

----------------------------------------------------------
II. Installation Instructions

To install vmtools version 2010.03.20Cb, follow these steps:

1. Login as root

2. Create an empty directory, such as /tmp/vmtools, to which the patch will be downloaded.

3. Download the vmtools VOLS cpio file
   vmtools-2010.03.20Cb-VOLS.cpio to the directory created in
   step 2.  Unwind the cpio file by:
cd [temp-directory from step 2]
cpio -icdum < vmtools-2010.03.20Cb-VOLS.cpio
cd

4. Run the Software Manager with the command:

scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/vmtools" (or the directory where you placed the Vmtools Update VOLS file vmtools-2010.03.20Cb-VOLS.cpio in step 2) and choose "OK."

9. When prompted to select software to install, make sure that
   the "vmtools" entry is highlighted.  Choose "Install".
10. This installation will remove and replace an earlier version
    of vmtools on your system.  Custom will notify you of this
    action to be taken.  Select "Continue" to acknowledge the
    notification and continue with the replacement with
    this latest version.
11. Installation of vmtools version 2010.03.20.Cb is now
    complete.  To exit the Software Manager, select "Exit" from
    the "Host" menu.
12. Once the installation has completed, you can remove or
    archive the vmtools-2010.03.20Cb-VOLS.cpio and the containing
    directory created in step 2.

From the Xinuos technical article database, record 127735. Reproduced with permission. The original is at www.sco.com/ta/127735, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.