Technical article 127734

What is the Libdnet version 1.11Ta for OpenServer 5.0.7V?

OpenServer 5.0.7

Written

Problem

What problems are fixed by Libdnet version 1.11Ta?

Solution

Libdnet release 1.11Ta fixes the following problem on OSR507V Version 3:

1. The open source component libdnet was released on OSR 5.0.7V to
   support the VMware open-vm-tools (vmtools) on VMs running on
   VMware hypervisors.  As released, the libdnet was unable to
   provide the MAC address of virtual NICs and the vmtoolsd daemon
   provided incomplete network information to the VMware host.
   In most cases this simply resulted in incomplete network data
   registered with the host.  For ESX 3.5 updates before update 3,
   the lack of a valid MAC address would result in the ESX host
   losing connectivity with all vSphere clients.

This release of libdnet was built using /usr/include/sys/scodlpi.h (extensions to the AT&T DLPI 2.0) which allowed correct MAC address information to be obtained.

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer Release 5.0.7V Version 3.0.0
----------------------------------------------------------
I. Software Notes and Recommendations

1. If you have any questions concerning this update, please contact your SCO software supplier or your SCO Support Representative.

2. UnXis strongly recommends that all customers remain current with the latest updates and critical patches to both their OSR507V virtual machine and their VM hypervisor of choice.

----------------------------------------------------------
II. Installation Instructions

To install libdnet version 1.11Ta, follow these steps:

1. Login as root

2. Create an empty directory, such as /tmp/libdnet, to which the patch will be downloaded.

3. Download the libdnet VOLS file libdnet-1.11Ta-VOLS.cpio
   to the directory created in step 2.  Unwind the cpio file by:
cd [temp-directory from step 2]
cpio -icdum < libdnet-1.11Ta-VOLS.cpio
cd

4. Run the Software Manager with the command:

scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/libdnet" (or the directory where you placed the Libdnet VOLS file libdnet-1.11Ta-VOLS.cpio in step 2) and choose "OK."

9. When prompted to select software to install, make sure that
   the "libdnet" entry is highlighted.  Choose "Install".
10. This installation will remove and replace an earlier version
    of libdnet on your system.  Custom will notify you of this
    action to be taken.  Select "Continue" to acknowledge the
    notification and continue with the replacement with
    this latest version.
11. Installation of libdnet version 1.11Ta is now
    complete.  To exit the Software Manager, select "Exit" from
    the "Host" menu.
12. Once the installation has completed, you can remove or
    archive the libdnet-1.11Ta-VOLS.cpio and the containing
    directory created in step 2.
13. The vmtoolsd daemon will need to be restarted for the updated
    libdnet.so.1 to take effect.  To accomplish this, if not
    immediately updating vmtools following this installation,
    execute the commands:
/etc/init.d/vmtoolsd stop
/etc/init.d/vmtoolsd start

From the Xinuos technical article database, record 127734. Reproduced with permission. The original is at www.sco.com/ta/127734, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.