Problem
Can I install Openserver 5.0.4 5.0.5 or 5.0.6 on a Pentium 4 based machine?
Solution
Openserver 5.0.4 and 5.0.5 will not work with a Pentium 4 based system. To use a Pentium 4 processor you will need to upgrade to Openserver 5.0.6. You will also need to apply rs506a and oss648a as these supplements provide the thermal throttle code which is essential to avoid permanent damage to the Pentium 4 processor.
With the introduction of the Pentium 4 processor thermal throttling was moved from a CPU function to a function of the operating system. Installing on an operating system less than described above could lead to permanent damage of the CPU or a highly unreliable machine.
The supplements including installation instructions are available from:
https://ftp.scoexpert.com/openserver5/rs506a
https://ftp.scoexpert.com/openserver5/oss648a
https://ftp.scoexpert.com/openserver5/oss648a.ltrThis information also applies to the Intel Xeon processors using the same NetBurst microarchitecture as the standard Pentium 4.
See the urls listed below for references detailing the processor fixes, specifications and multi-processor support available:
http://www.sco.com/support/docs/openserver/506/fixlist.html
http://www.sco.com./products/openserver/System_Requirements.htmlFor additional information visit following locations:http://www.intel.com/xeon/
http://developer.intel.com/technology/itj/q12001/pdf/art_4.pdf
http://www.sco.com/support/docs/openserver/506/fixlist.html
http://www.sco.com./products/openserver/System_Requirements.html See also
TA113341, "What problems are fixed in Release Supplement 506a for SCO OpenServer Release 5.0.6?"
TA118212, "What is Support Level Supplement (SLS) OSS648A, the Processor Supplement for OpenServer 5.0.6?"