Technical article 112462

Fresh installation of SCO OpenServer 5.0.6 fails with NCR 815XS host adapter.

OpenServer 5.0.6

Written · Last revised

Problem

I am able to successfully install SCO OpenServer 5.0.6 where the primary hard disk is attached to an NCR 815XS host adapter, but the system hangs during the first attempt to boot from the disk with this message:

F slhainit

Solution

Power cycle the system and enter the following after the "boot:" prompt:

defbootstr scsi.noscan
The system should now boot successfully.

To make the above boot string permanently effective, use a text editor to add it to the DEFBOOTSTR entry in /etc/default/boot.

For example, if the original DEFBOOTSTR entry reads as follows:

DEFBOOTSTR=hd(40)unix swap=hd(41) dump=hd(41) root=hd(42)

Modify it so that it now reads:

DEFBOOTSTR=hd(40)unix swap=hd(41) dump=hd(41) root=hd(42) scsi.noscan

See also

ta111523, "A fresh install of OpenServer 5.0.5 or 5.0.6 on top of a 5.0.5 or 5.0.6 system hangs."

From the Xinuos technical article database, record 112462. Reproduced with permission. The original is at www.sco.com/ta/112462, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.