Problem
There may be problems with the installation or upgrade of SCO
OpenServer 5 that are not covered by the technical articles and
require further investigation. How can a debug logfile of the
installation or upgrade be generated? Solution
First, if you want to save the debug log, you will require a floppy disk formatted with an EAFS filesystem on it.
To do this on an existing OpenServer 5 system (with a 3.5 inch floppy disk), run the following:
mkfs -f EAFS /dev/rfd0135ds18Once this is created, proceed with the installation or upgrade as usual, but at the Boot: prompt enter the following bootstring:
defbootstr isl.debugIf you are already specifying a bootstring, simply append the "isl.debug" keyword to the end of it.
Once the installation files have completed loading from CD-ROM, proceed with the installation or upgrade as usual. But, at any point you should be able to switch to a character screen by pressing <Ctrl><Alt><F3>, and be presented with a prompt of <installation>.
If the installation or upgrade is failing with an error message, it is a good idea to switch to the character screen and view/save the install debug log at the point which the error is displayed.
This is now running a shell within the ramdisk created for the Installation and Query Manager (IQM) where there are a limited number of shell commands available.
The installation debug log is stored in /tmp/install.log and can be
viewed with the cat command (pg and vi are not provided within the
ramdisk). To save this file to disk, mount the floppy that you
previously created an EAFS filesystem on:mount /dev/install /mntand then copy the file to it:
cp /tmp/install.log /mntThen unmount the disk:umount /mntThis disk can now be mounted on a live OpenServer 5 system and viewed with the standard commands (pg, more, view, and so on).