Technical article 127432

How can I use guest_conf script to reconfigure my cloned SCO OpenServer 5.0.7V for VMware Virtual Appliance?

OpenServer 5.0.7

Written · Last revised

Problem

I would like to make one or more clones of my SCO OpenServer 5.0.7V Virtual Machine.

Can I use the /usr/sbin/guest_conf script to configure the clones with new host names, IP addresses etc?

Solution

SCO supports the use of guest_conf to reconfigure clones of SCO OpenServer 5.0.7V Virtual Machines.

To clone your virtual machine please see the instructions in:

TA127416 "How to perform a full system backup for emergency recovery purposes of a SCO OpenServer 5.0.7V VM running on VMware ESX/ESXi 3.5 using the VMware CLONE method?"

Each running OpenServer 5.0.7V system requires a unique, valid
OpenServer 5.0.7 V license.  Cloning, by its very nature,
duplicates the current license and registration information.
This duplication must be avoided when running a cloned system
since all but one of the systems will appear as an unlicensed
system.

Once the clone has been created, boot the clone, login to it as root, and do the following:

1. Run "scoadmin license" and remove the existing OSR 5.0.7V license or cross-grade license and its base OSR 5.0.7 Enterprise license.

2. Run:
/usr/sbin/guest_conf

to reconfigure the hostname, network parameters etc and add a new license to the cloned virtual machine.

From the Xinuos technical article database, record 127432. Reproduced with permission. The original is at www.sco.com/ta/127432, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.