Technical article 113165

How do I add a 3COM 3C589D to SCO OpenServer 5.0.x?

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I am having problems configuring and using a PCMCIA 3COM 3C589D card in my OpenServer 5.0.4 laptop.

Cause

The driver supplied with the SCO OpenServer 5.0.4 product may not support the card in use.

Solution

Later revisions of the 3C589 card are supported with a newer driver available for download from:

https://ftp.scoexpert.com/drivers/OSR504/network/e3E/

Before downloading, remove the existing driver from your server using the following steps:

a) # custom
b) Select "SCO OpenServer Enterprise System"
c) Select "SCO OpenServer Enterprise System Connectivity"
d) Select "SCO OpenServer Enterprise System Network Drivers"
e) Select "3COM 3C5X9 Etherlink III"
f) Ensure no other item of software is selected with "*"
g) Select "Software | Remove Software"

Now add the new drivers using the instructions from the README file provided at the ftp download site.

You can now run "netconfig" and add the card using the new driver.

When adding the TCP/IP protocol you may wish to increase the number of TCP connections from the default of 256 to 1024 which is the new default for OpenServer 5.0.5 and 5.0.6.

Within "netconfig", highlight the NIC and select "Modify Hardware" and manually specify the type of connection, either TP (UTP) or BNC (Coax), as AUTO sensing may fail when the server boots up.

Ensure that the IRQ and Memory Address are the ones that match the PCMCIA Card settings as the defaults that "netconfig" presents may not be the ones that the card is using.

See also

https://ftp.scoexpert.com/SLS/README.OSR5.Supplements for a list of the latest patches for OpenServer 5.0.4.

From the Xinuos technical article database, record 113165. Reproduced with permission. The original is at www.sco.com/ta/113165, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.