Technical article 125595

How do I add a Xerox printer to the OpenServer 5.0.x system?

OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I configured a Xerox printer as a remote printer on the OpenServer 5.0.x system, however all the jobs are sitting in the print queue. Also, lpstat -t command shows the following message:

xerox:
              queuing is enabled
*** | Unknown Identification
    | problematic object: printer-name

Solution

The Xerox printer has a preset printer queue name of lp. You will have to make the following changes to the /etc/printcap file:

change  rp=<printer_queue> to rp=lp
i.e. If you named the printer xerox and the printer queue
     xerox you should have the following entry in the /etc/printcap
     file:
xerox:\
:lp=:rm=xerox:rp=xerox:sd=/usr/spool/lpd/test:mx#0:

After you make the above changes the /etc/printcap file should look like this:

xerox:\
:lp=:rm=xerox:rp=lp:sd=/usr/spool/lpd/test:mx#0:

You will have to restart the /usr/spool/lpd daemon.

#/usr/lib/lpd shut
#/usr/lib/lpd start

From the Xinuos technical article database, record 125595. Reproduced with permission. The original is at www.sco.com/ta/125595, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.