Problem
What driver do I use to install OpenServer on one of the SCSI Raid controllers mentioned below?
HARDWARE: Adaptec ATA RAID 2400A
Adaptec SCSI RAID 2000S
Adaptec SCSI RAID 2005S
Adaptec SCSI RAID 2010S
Adaptec SCSI RAID 2015S
Adaptec SCSI RAID 2100S
Adaptec SCSI RAID 2110S
Adaptec SCSI RAID 3200S
Adaptec SCSI RAID 3210S
Adaptec SCSI RAID 3400S
Adaptec SCSI RAID 3410S Solution
The Adaptec RAID controllers mentioned above uses the "dpti5"
driver which is available from Adaptec. The controller/driver is
supported by Adaptec for OpenServer 5.0.6 and 5.0.7.From Adaptec's website, download the "dpti5" driver and create a boot
time loadable driver (btld). Then at the Boot: prompt link in the
"dpti5" driver.For example, to link in the dpti5 driver during install you would use the following format:
defbootstr link=dpti5 Sdsk=dpti(0,0,0,0) See also
TA125449, "What driver do I use for the Adaptec 2120S or 2200S controllers on OpenServer and where can I get it?
TA105694, "How to transfer supplements from a DOS system to a UNIX system and create diskettes for UNIX on a DOS system."