Technical article 125449

What driver do I use for the Adaptec 2120S or 2200S controllers on OpenServer and where can I get it?

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

What driver do I use for the Adaptec 2120S or 2200S controllers on Openserver and where can I get it?

Solution

The Adaptec 2120S and 2200S RAID controllers use the "aacraid" driver which is available directly from Adaptec. The controller/driver is supported by Adaptec for OpenServer 5.0.6 and 5.0.7. At the time of this writing, the driver could be found at the following URL:

http://adaptec.com/worldwide/support/driverdetail.html?sess=no&language=English+US&cat=/Product/ASR-2120S&filekey=asr2120s_2200s_sco506_sco507_drv.zip

NOTE: previous versions of this driver would only work properly on single processor systems. On multiprocessor systems, the additional CPU(s) could fail to post.

See also

http://www.adaptec.com/worldwide/support/driverindex.html for the complete list of Adaptec drivers by controller or by Operating System.

From the Xinuos technical article database, record 125449. Reproduced with permission. The original is at www.sco.com/ta/125449, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.