Technical article 125389

How do I install OpenServer 5.0.x on an HP or Compaq ProLiant system with a Smart Array 641 raid controller.

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

My root disk controller isn't detected during the installation of OpenServer 5.0.x using a 641 raid controller.

HARDWARE: HP/Compaq Smart Array 641 raid controller

Solution

Go to http://www.hp.com and download the latest Compaq Extended Feature Supplement (EFS), and create a boot time loadable driver (btld). Then at the Boot: prompt link in the "ciss" driver.

For example, to link in the ciss driver during install you would use the following format:

defbootstr link=ciss Sdsk=ciss(0,0,0,0)
NOTE:     Note that additional bootstrings may be required.
          Please see the technical article referenced below and consult
          Compaq/HP's documentation for more information

See also

TA105937 "SCO OpenServer installation bootstring options."

From the Xinuos technical article database, record 125389. Reproduced with permission. The original is at www.sco.com/ta/125389, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.