Technical article 105917

How do I install OpenServer Enterprise 5.0.4 on the Compaq ProLiant 2500 using a SMART 2/P or 2/E Array controller?

OpenServer 5.0.4

Written · Last revised

Problem

What is the procedure to correctly install SCO OpenServer Enterprise on the ProLiant 2500 using a SMART Array Controller?

NOTE:     SCO has incorporated versions of the IDA and WD driver into
          the 5.0.4 media, but the CHA driver must still be BTLD'd in if
          required by the user.

Solution

Although there may be slight variations in the flow of this procedure based on how you respond to prompts, the process will generally be as follows.

1. Boot the server from the Compaq replacement N1 Boot floppy
provided in the latest Compaq EFS diskette set.  (To obtain the
latest Compaq EFS, see the article, "How do I obtain the Compaq
Extended Feature Supplement (EFS) 5.xx?".)

2. For a first time installation, in response to the Boot: prompt, type "link", as follows:

SCO OpenServer(TM) Release 5
Boot
:defbootstr Srom=wd(0,0,0,0) link=cha

Note: The "wd" portion of the line: (0,0,0,0) indicates that the IDE CD-ROM is configured as the master device on the primary IDE controller.

You will see:

fd(64)unix root=ram(7) ram.preload=7 swap=none dump=none nbuf=3 isl.S=3 isl.pause Srom=wd(0,0,0,0) ramdisk=fd(64) rootFS link="cha" btld=fd(60)

Sizing memory
................
Loading kernel fd(64)unix .text
.....................................
Loading kernel fd(64)unix .data
.....................................
Loading kernel fd(64)unix .bss

Loading kernel symbol table, this may take a few minutes

Please insert the fd(60)cha volume and press <Return>, or 'q' to quit.

3. Insert the latest Compaq EFS BTLD diskette and press <Enter>. The following screen of information will appear:

cha.cha: Loading module fd(60)/CUCHA/driver/cha/Driver.o  .text
...................................................................
cha.cha: Loading module fd(60)/CUCHA/driver/cha/Driver.o  .data
..........................
cha.cha: Loading module fd(60)/CUCHA/driver/cha/Space.o  .data
.

cha: Driver "cha" successfully loaded. Character major = 6

Insert the Boot Disk and press <Enter>.

4. At this point, insert the original SCO OpenServer Boot floppy which came with your CD-ROM media from SCO and press <Enter>.

5. Eventually you will be prompted to insert the 'cha' BTLD disk.
Insert the BTLD, and press <Enter>.  You should see a blue
"RESTRICTED RIGHTS LEGEND" screen.
6. Proceed to the "Identifying the installation media device"
screen.  Press the space bar to toggle to SCSI CD-ROM from SCSI
Tape.
Media device to be used: IDE CD ROM
IDE Controller:        primary
Master or Slave:       master

Note, the above settings indicate that the CD-ROM is the master device on the primary IDE Controller.

7. Insert the CD-ROM media when prompted.

After entering the licensing information, select the configuration parameters appropriate for your installation.

8. To preserve the EISA Configuration Utility (ECU) partition that we recommend you install prior to installing the operating system, it is necessary to perform an "Interactive fdisk/divvy" installation.

9. When prompted for the networking configuration, choose to "defer"
networking if you are using the integrated NIC.  For additional
information regarding configuring the integrated NIC, see TA105479,
"My Netelligent NIC is not being recognized during a 5.0.x
installation on my Compaq ProLiant.".

As the system installation proceeds, you may see the following:

Preparing root filesystem ... Done.

The BTLD packages will now be extracted.

Extracting BTLD distribution for cha ... Done.

Extracting additional files from your media source ... Done

Setting files permissions ... Done

10. Several additional messages will appear on the screen during the installation process, including the 'Percent Installation Complete'. Eventually, you will see:

Installation and initial configuration of SCO OpenServer Enterprise System is complete.

Before you use the system:

-- Perform any additional configuration needed, as described in the Release Notes.

-- Create an emergency root and boot floppy set as described in the SCO OpenServer Handbook.

(EOF)
Press <Enter> to continue:

11. After pressing <Enter>, you will see:

At the "Power Off or Reboot" prompt, remove the floppy disk
from the drive and press any key to reboot.  The screen clears,
then displays the "Boot:" prompt.
**     Safe to Power Off     **
            -or-
**  Press any Key to Reboot  **

12. Remove the media and press <Enter>.

From the Xinuos technical article database, record 105917. Reproduced with permission. The original is at www.sco.com/ta/105917, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.