Technical article 127074

How do I install SCO FoxBASE+ Release 2.1.2 on OpenServer 6.0.0?

OpenServer 6.0.0

Written · Last revised

Problem

How do I install SCO FoxBASE+ Release 2.1.2 on OpenServer 6.0.0?

Solution

Before you can install SCO FoxBASE+ Release 2.1.2 on your SCO OpenServer 6.0.0 system you will need to:

1) Install Maintenance Pack 3 (MP3) onto your system.

MP3 can be downloaded from:
http://www.sco.com/support/update/download/release.php?rid=295

2) Install OSS710a, the Xenix Compatibility Update, onto your system. This update can be downloaded from:

http://www.sco.com/support/update/download/release.php?rid=350
Installing SCO FOxBASE+ Release 2.1.2
=====================================

Once MP3 and OSS710a are installed, you can proceed to install SCO FoxBASE+ as follows:

- This Article assumes that you have:

- SCO FoxBASE+ Release 2.1.2 Media on 3.5" Floppy Disk - The Server you are installing on has a 3.5" Floppy Drive

1) Log into the SCO OpenServer 6.0.0 system character console as root (using the Graphical Console with the steps below will not work).

2) Insert the SCO FoxBASE+ Release 2.1.2 floppy

3) Run the Software Manager (custom) and choose:

Software -> Install New...

4) Choose the server you want to install from and "Continue"

5) Set the "Media Device:" as "Floppy Disk Drive" and "Continue"

6) The Software Manager will examine your media and will ask you to "Select software to install". If its not already highlighted, highlight " SCO FoxBASE+ (ver 2.1.2d)" and "Install"

7) You will see the error message:

sed: Cannot open: ./tmp/perms/prep/*/prep.message: No such file or directory (error 2)
cat: cannot open /tmp/2004: No such file or directory (error 2)
?

8) Press the "Del" key and you will see the message:

Error:
  Prep script failed for SCO FoxBASE+ (SCO:fox+)
Error Stack:
  Prep script ./tmp/perms/prep.fox+ failed
Please enter one of the following:
  'r'   To retry the operation
  'i'   To ignore the error, and continue
  'ca'  To cancel
Enter choice:
9) Enter `i` to ignore the error and continue
10) Enter the Serial Number when prompted to
11) Enter the Activation Key when prompted to
12) The installation will then complete.

See also

TA#126153 "I am getting a "File Write error" when trying to run my Foxbase application on OpenServer 6"

TA#126689 "SCO Foxbase and other SCO Xenix binaries are hanging after the installation of OSS706C"

TA#126890 "SCO OpenServer Release 6.0.0 Maintenance Pack 3 Release and Installation Notes"

TA#127052 "What is Support Level Supplement (SLS) OSS710A, the OpenServer 6.0.0 Xenix Compatibility Update?"

From the Xinuos technical article database, record 127074. Reproduced with permission. The original is at www.sco.com/ta/127074, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.