Technical article 111009

How do I install the UnixWare and OpenServer Development Kit (UDK) on my SCO OpenServer Release 5 system?

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

How can I install the UnixWare and OpenServer Development Kit (UDK) on my SCO OpenServer Release 5 system?

Solution

Before attempting to install the UnixWare and OpenServer Development Kit, you will need to find out what release of the kit you are using. The release of the UnixWare and OpenServer Development Kit is written on the face of the CD-ROM and should be either:

UnixWare and OpenServer Development Kit 7.0 UnixWare and OpenServer Development Kit 7.1 UnixWare and OpenServer Development Kit 7.1.1

Note that all of these releases are only supported for full installation on SCO OpenServer Release 5.0.5 or later. The only UDK package supported on releases earlier than SCO OpenServer Release 5.0.5 is OSRcompat.

If you are attempting to install UnixWare and OpenServer Development Kit 7.0, see ta109645, "What is SLS OSS486A, the UDK Installation Supplement for OpenServer 5.0.5?"

If you are attempting to install UnixWare and OpenServer Development Kit 7.1 or 7.1.1, follow these steps:

1. Log in to your SCO OpenServer system as root.

2. Put the UDK CD-ROM into the system's CD-ROM drive and type:

mount -r /dev/cd0 /mnt

The above command assumes /mnt is available to use as a mount point for the CD-ROM, and that the UDK CD-ROM is in the only CD-ROM drive on your system.

3. Change directories to the mounted CD-ROM:

cd /mnt

4. Run the OSRUDKInst.sh install script to install the UDK onto your system:

./OSRUDKInst.sh /mnt
The script can also be used to install the Java Development Kit
(JDK).
NOTES:    The UDK Release Notes are misleading in that they state that you
          can also use the pkgadd(ADM) command to install the UDK on your SCO
          OpenServer Release 5.0.5 system. In fact, you cannot use pkgadd(ADM)
          to install the UDK.

The comments at the beginning of the OSRUDKInst.sh script contain the lines:

#     User needs to mount the CD-ROM and type "./505UDKInst.sh $mount_dir"
#     where $mount_dir is the mount point of the CD-ROM to invoke script.

The first line is incorrect, as the script name should be:

./OSRUDKInst.sh
NOTE:  The OSRCompat package is installed and can be viewed by the "custom" or
       "scoadmin software" tools.  However, to obtain just the latest version of
       OSRCompat and you do not wish to install the full UDK then see:

TA # 118708, "How do I find and install the OSRcompat 7.1.1b package onto my OpenServer 5 system?"

See also

ta109645, "What is SLS OSS486A, the UDK Installation Supplement for OpenServer 5.0.5?"

From the Xinuos technical article database, record 111009. Reproduced with permission. The original is at www.sco.com/ta/111009, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.