Problem
I have an old version of a Compaq Extended Feature Supplement (EFS) on my Compaq server (Version 5.12) and would like to upgrade it to Version 5.30, for example. What is the procedure?
NOTE: DISCLAIMER: Compaq EFSs are provided and supported by Compaq;
it is required that you read any relevant documentation from Compaq
prior to upgrading an EFS. Solution
Follow these steps:1. First, check Compaq's website (at https://www.hpe.com for the latest version of EFS. The current URL is:
https://www.hpe.comDownload the SoftPaq and follow the installation instructions provided. This will generate a number of floppy disks, of which two will be the EFS disks for SCO OpenServer 5.0.x.
2. Be sure that you read Compaq's documentation (the README file) to ensure that there is no conflict with the instructions detailed below.
Note that earlier versions of Compaq EFSs (prior to Version 5.12) are removed in a different way.
You will need to have a PC running DOS or Windows to do this.
3. Once you have generated your disks, bring the server into single-user mode.
To ensure that the disks can be read successfully by the server's floppy drive, we suggest that you perform:
dd if=/dev/fd0 of=compaq_efs.dsk1.dd bs=1024k4. Run netconfig.Within "netconfig" check the details of the server's IP address, NetMask, and so on, as removing the Compaq EFS will also remove the network card if it is supported by the Compaq EFS.
However, it is recommended that you remove the network chain first before proceeding to the next step. There is no need to relink the kernel when prompted.
5. Run "custom" and remove the currently-installed Compaq EFS.
At this stage it is important NOT to reboot the server.
6. Install New Software and insert the two Compaq EFS diskettes when prompted.
During the installation, if there is a network card supported by the Compaq EFS, then it will ask you for its configuration.
7. Once the server has loaded the new Compaq EFS, and the kernel has been rebuilt and relinked, the server can then be rebooted.
It is recommended that you run "netconfig" first and check the network chain.
See also
Check compatibility of the server with SCO's and Compaq's web sites:
http://www.sco.com/chwpftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf