Technical article 127348

How to add a virtual disk to my OpenServer 5.0.7V appliance?

OpenServer 5.0.7

Written · Last revised

Problem

I have installed an SCO OpenServer 5.0.7V Virtual Appliacne and I want to add further filesystems.

For example, my application needs two additional filesystems and the 5.0.7V appliance only provides a root filesystem.

Solution

You can add additional filesystems to your SCO OpenServer 5.0.7V Virtual Appliance as follows:

Note that you do not need to shutdown your OSR507V guest Operating System when performing steps 1 through 12.

1.  In the VMware Infrastructure Client (VMIC) right click on your
    OSR507V guest OS and select "Change properties".
2.  Click on "Add"
3.  Select "SCSI disk"
4.  Select "Create new virtual disk" and click on Next
5.  Select the size you want to assign to your virtual disk
6.  Select "Select Datastore" and click on "Search"
7.  Select your datastore and Ok.
8.  Click "Next"
9.  Now you have to decide whether you want to include the new disk
    into any snapshot.
10. Click "Next"
11. Click "Finish"
12. Click "Ok"

Now log on to your OSR507V system as root and perform the steps described in TA109379 on how to add a SCSI drive.

Finally, run either "scoadmin filesys" or "mkdev fs" to add your new virtual disk as a filesystem to your system.

From the Xinuos technical article database, record 127348. Reproduced with permission. The original is at www.sco.com/ta/127348, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.