Technical article 110039

How to change the System Name, Domain Name, and IP address?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.1.0UnixWare 7.1.1UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

I want to change the System Name, Domain and IP address on my SCO Unix system.

Solution

Follow the steps below to change your SCO Unix System Name, Domain Name, and IP address:

1.  "uname -S <new name>" if you are changing the server name.
2.  "netconfig" or "netcfg" and change the details there.
3.  Check /etc/hosts to ensure the new details are correct and that there are
    no duplicate entries.

If you're changing your domain name then check /etc/resolv.conf.

4.  Relink the kernel (only necessary on OpenServer 5) and reboot your server.

For OpenServer5 see the steps below and the additional following for troubleshooting:

http://osr507doc.xinuos.com/en/MailMsgG/mmdfD.troub_sysname.html
http://aplawrence.com/Jeffl/new_name.html
For UnixWare7 see:
http://uw714doc.xinuos.com/en/man/html.1M/setuname.1M.html

However, for a more detailed check on Legacy systems use the steps below:

Netscape:
--------
 (1) Go to SCOadmin-> Netscape Server Admin, and log in as the "admin" user.
     The password is usually the root password.  Turn the servers OFF,
     then click on each server port number, choose Network Settings, and
     update Server Name.  Do this for port 80, scohelphttp, and any other
     ports in use. (Netscape may be very slow to start if you aren't
     connected to the network.)
(2) nsadmin stop
(3) vi /usr/ns-home/admserv/ns-admin.conf; edit ServerName, Addresses.

(4) vi /usr/ns-home/cgi-bin/counters/conf/count.cfg; update host names at the end of the text file.

Netware:
-------
 (5) vi /etc/netware/nwconfig, and change server_name.
Webtop:
------
 (6) If you change the name of your system after installing the Webtop,
     you must ensure that the system name is changed properly throughout
     the Webtop. To do this, perform the following commands while logged
     in as root:
/opt/webtop/bin/webtop setup
/opt/webtop/bin/scoadminreg

You should also confirm that the system name has been changed properly in your web server. If you are using the Netscape FastTrack Server, check the following files:

/usr/ns-home/admserv/ns-admin.conf
/usr/ns-home/httpd-80/config/magnus.conf

Replace any instances of the previous system name with the new system name. After editing the files, restart the administration server and the web server.

If you are using another type of web server, check your product documentation for information about editing configuration files.

NFS:
---
 (7) Check if the system hostname matches the entry in the
     /etc/net/*/hosts files. For example, if the machine's hostname
     was hulk (as returned by uname -n), the entry in each of the
     /etc/net/*/hosts files should look like:
hulk    hulk

If the first entry in each of the /etc/net/*/hosts files does not match the machine's hostname, then stop NFS and update the first entry in the /etc/net/*/hosts files.

- Should you be unable to mount the server's NFS new name filessytems with
  (-o rw=remote_host) then check that you are not using the server's DNS
  name.  It is likely that NFS will require the new name to be entered
  into the /etc/hosts file.

This issue has been reported to SCO Engineering.

DNS:
---
 (8) Update /etc/inet/named.boot and /etc/inet/named.d/* if DNS is configured.
SAMBA / NETBIOS:
---------------
 (9) If netbios was installed then update the IP address in /etc/inet/nb.conf
     (/etc/default/nbconf for OSR5).
and if SAMBA is being used, check /etc/smb.conf
MMDF:
----
 (10) If MMDF is configured as the system MTA, you may be able to use:
        scoadmin > Mail
     to change the hostname in affected files, presuming no
     hand-customized modifications which might not be noticed.
For absolute comprehensive reconfiguration:
   su - mmdf
   vi mmdftailor  (replace oldhostname with newhostname)
   cd table
   vi alias.* *.chn *.dom  (replace oldhostname with newhostname in each)
Also modify any other customized files referenced in mmdftailor
The rebuild the mmdf database tables using:
   ./dbmbuild
Additional TroubleShooting:
--------------------------
- Logging into CDE locks, the server is slow and appears to hang

Check that, having used "netcfg" to change the server's IP Address that the OLD Address has been removed.

- 'netcfg' requests a kernel relink and a reboot is required

Check the /etc/hosts file for any "<" ">" entries, for example, <SERVER12345>

The length of 'uname' is a set to the value of 'char', however, setting a limit of 8 characters would ensure that there are no problems within legacy tools such as 'uucp' and 'mmdf'.

Check with "setuname -n <newname.domain>"

- Use the following "find" command to create a list of files containing the old hostname or old IP address:

# find / -type f -exec fgrep -l '<old-name/old-ip>' {} \; > /tmp/file.list

- Some instances of the old System Name and IP address will remain, notably in /var/adm/isl/ifile and in various history and log files.

See also

TA#127300: "How to change the System/Host Name, Domain Name or IP Address on my SCO OpenServer 6.0.0 system?"

From the Xinuos technical article database, record 110039. Reproduced with permission. The original is at www.sco.com/ta/110039, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.