Technical article 127857

Host Bus Adapter (HBA) Driver Supplement - mpt2 Driver version 2014.06.18, IHVVERSION 2014.06.18?

OpenServer 6.0.0UnixWare 7.1.4

Written

Problem

LSI Fusion-MPT 2 Serial Attached SCSI Host Adapters are not supported on either UnixWare 7 and SCO OpenServer 6.

Solution

The mpt2 Driver Supplement provides the following driver:

mpt2 - LSI Fusion-MPT 2 Serial Attached SCSI Driver Version 2014.06.18

This driver provides support for LSI Fustion-MPT 2 SAS chips and host adapters.

This driver can be used during fresh installation of any supported OpenServer 6/UnixWare 7 system or can be applied to an existing system.

The mpt2 driver is provided in hba.mpt2.2014.06.18.iso, an ISO image of an HBA CDROM.

This ISO image is available at the following URL:

https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/drivers

HARDWARE: HBA hardware supported by mpt2 2014.06.18:

Adapter or Chip Set  Type
-------------------  ------------
LSI SAS2004
LSI SAS 9211-4i      PCI Express 2.0 4-port internal
LSI SAS2008
LSI SAS 9200-8e      PCI Express 2.0 8-port external
LSI SAS 9202-16e     PCI Express 2.0 16-port external
LSI SAS 9210-8i      PCI Express 2.0 8-port internal
LSI SAS 9211-8i      PCI Express 2.0 8-port internal
LSI SAS 9212-4i4e    PCI Express 2.0 4-port internal +
                         4-port external
Dell PERC H200 Integrated/Adapter
                     PCI Express 2.0 8-port internal
Dell PERC H200 Modular
                     PCI Express 2.0 4-port internal
Dell 6Gbps SAS       PCI Express 2.0 8-port external
LSI SAS2116
LSI SAS 9201-16e     PCI Express 2.0 16-port external
LSI SAS 9201-16i     PCI Express 2.0 16-port internal
Dell 6GB SAS controller
LSI SAS2308
LSI SAS 9206-16e     PCI Express 3.0 16-port external
LSI SAS 9207-4i4e    PCI Express 3.0 4-port internal +
                         4-port external
LSI SAS 9207-8i      PCI Express 3.0 8-port internal
LSI SAS 9207-8e      PCI Express 3.0 8-port external
LSI SAS 9217-4i4e    PCI Express 3.0 4-port internal +
                         4-port external
LSI SAS 9217-8i      PCI Express 3.0 8-port internal
-------------------------------------------------------------------------
I. Installation

Prior to installation, burn a CD from the mpt2 Driver Supplement ISO image.

While installing OpenServer 6/UnixWare 7, insert the mpt2 Driver Supplement CD before any HBA drivers supplied with your media kit.

Alternatively, install the mpt2 Driver Supplement CD after installation by inserting the mpt2 Driver supplement CD in the CD drive and issuing the following command as root:

pkgadd -d <device>
where <device> is the name of the CD drive, e.g., "cdrom1".  See
pkgadd(1) for details.

For diskless installation, download the ISO image to your system and use marry, mount and pkgadd to install the driver:

marry -a /tmp/hba.mpt2.2014.06.18.iso
mount /dev/marry/tmp/hba.mpt2.2014.06.18.iso /mnt
pkgadd -d /mnt mpt2
umount /mnt
marry -d /tmp/hba.mpt2.2014.06.18.iso
------------------------------------------------------------------------
II. Software Notes

This driver has been tested with and is supported on:

SCO UnixWare 7 Release 7.1.4+ SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0

From the Xinuos technical article database, record 127857. Reproduced with permission. The original is at www.sco.com/ta/127857, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.