Technical article 128186

What is Support Level Supplement (SLS) OSS726K, the OpenServer 6 Definitive 2018 (D2M1) Supplement 2?

OpenServer Definitive 2018OpenServer 6.0.0

Written · Last revised

Problem

What problems are fixed by Support Level Supplement (SLS) OSS726K, the OpenServer 6 Definitive 2018 (D2M1) Supplement 2?

Solution

NOTE:  By default, OpenServer 6 Definitive now halts if a panic is
       encountered.  For details please see the "Software Notes and
       Recommendations" section below.

The following fixes were first provided in OSS726A and are also provided in OSS726K:

1.  Fix an RD1000 panic.

Systems using the AHCI device driver and an attached but empty Dell PowerVault RD1000 Removable Disk Storage device would panic on start up.

To fix these panics requires both this escalation patch for the
sd01 device driver and to use version 2.0a (or later) of the
AHCI device driver.  You can separately download that device
driver or install it via patchck.

The sd01 portion of the fix is to change a recursive loop to an iterative loop.

The ahci portion of the fix is to resolve an event registration issue.

OSR6-113
2.  Fix a mkdev hd command failure when configuring a Dell PowerVault
    RD1000 Removable Disk Storage hard disk.  This error was
    encountered:

ERROR: One or more of the DDB files are not present/corrupt/inaccessible.

UX:ls:ERROR: Cannot access /dev/hba/hba*: no such file or directory.

An incorrect data conversion was fixed.
OSR6-124

The following fixes were first provided in OSS726B and are also provided in OSS726K:

3.  Update header files to support GNU development system while
    maintaining backward compatibility with the native compiler.
UW7-140
4.  Avoid undefined WCHAR_MIN and WINT_MIN variables by setting
    defaults if these variables are not defined elsewhere.
UW7-138
5.  Add missing setenv and unsetenv declarations to stdlib.h
    setenv/unsetenv were added to libc in 2006 but the declarations
    were not added to stdlib.h.
UW7-148

The following fixes were first provided in OSS726C and are also provided in OSS726K:

6.  Added the ACPI reset command to avoid keyboard issues when
    using PS2_KEYBOARD=NO boot parameter.  Previously the 8042
    keyboard controller reset command was used in this scenario
    which resulted in a system hang.
UW7-111
7.  Updated the mkdev.h header file to support different definitions
    for UDK and new development systems.
UW7-155
8.  Initialize three RTCSTIME variables which are needed by the PSM
    routines.  Previously, invalid time settings at boot sometimes
    causes a system hang.
OSR6-148

The following fixes were first provided in OSS726D and are also provided in OSS726K:

9.  Add support for installing OpenServer 6 Definitive 2018 under the
    KVM hypervisor on the CentOS operating system.
UW7-156
10.  Provide a new boot parameter, PANICHALT.  When set to Y the
     system halts on panic and requires hard reboot instead of
     automatically shutting down or rebooting.  The default is Y.
     If set to N then system behaves as per the PANICBOOT settings.
OSR6-172

OSS726E was used for Xinuos development of OSS726F; OSS726E was not publicly released.

The following fixes were first provided in OSS726F and are also provided in OSS726K:

12.  Fixed an OpenServer 6 Definitive 2018 NFS bug so that OpenServer
     now lists directory contents of mounted NFS shares that are
     larger than two terabytes.
UW7-127
13.  Additional revisions to header files and libraries to correct
     some of the stdio helper functions.  These functions were
     provided in prior releases to aid in open source porting.  This
     SLS modifies:
        __freadable()
        __fwritable()
        __fbufsiz() should have been __fbufsize()
UW7-173
14.  The "rm -f" command with no specific files no longer returns an
     error code.  This conforms to the upcoming POSIX standard
     http://austingroupbugs.net/view.php?id=542.  It also matches
     most other UNIX/BSD/Linux implementations and keeps open source
     configure scripts from complaining.  Any existing shell scripts
     which expect an error code when the rm -f command has no files
     will need to be manually updated given the new standard.
UW7-29

The following fixes were first provided in OSS726G and are also provided in OSS726K:

15.  Corrected LD_PRELOAD so, when used, loads the libraries set by
     LD_PRELOAD prior to any other libraries, including libc.so.1.
UW7-183
16.  Updated the /usr/include/strings.h file to add declarations
     needed for compiling some open source.
UW7-138
17.  Fixed incorrect pkgadd warning messages that were displayed
     when adding packages that contain linked files.  Also did
     minor source code consolidation to synchronize the
     UnixWare 7 Definitive and Open Server 6 Definitive packaging
     tools (pkg* commands).
UW7-143
18.  Added the nologin command.  nologin provides a disabled shell
     security mechanism for UNIX daemon accounts.  For more
     information, after installation run:  man nologin
UW7-193
19.  Added the whereis command for locating binaries and manual
     pages.  For more information, after installation run:
man whereis
UW7-193
20.  Correct the permsissions on /tmp, if incorrect.
OSR6-167
OSS726H was not publicly released.

The following fixes were first provided in OSS726I and are also provided in OSS726K:

21.  The getprogname and setprogname functions are now in libc.
     Also cleaned up a typdef redeclaration error.
UW7-146
22.  Added IF_NAMESIZE to the /usr/include/net/if.h file, per the
     IEEE Standard 1003.1-2017,
     https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/net_if.h.html
UW7-146
23.  Provided in parallel with oss726k, avoid a system hang in version 2.0b
     of the AHCI device driver when running a virtual machine under KVM.
UW7-161
24.  Improved the hyper-visor detection code and updated the hw command to
     show if the instance is running as a virtual machine.
UW7-162
25.  Avoid null pointers which can otherwise cause hangs during ISL.
UW7-164
26.  Integrated Kernel Memory Debugging Tool (kmdt) and an updated
     crash utility.  The kmdt is integrated into the kernel but must
     be enabled before use, as described in the Software Notes and
     Recommendations sction below.
UW7-186
27.  Added missing data types to the types.h header file.
UW7-208
28.  Modified these utilities in /u95/bin to be large-file aware:
awk     comm   copy    cut   dd     egrep
fgrep   fold   grep    hd    head   in.tftpd   join
nawk    od     paste   pr    sed    sort       split
tail    tftp   uniq    wc    what
UW7-178
29.  Modified the dd command to accept arguments larger than 2147483647.
UW7-178
30.  Modified the tail command to handle more than 64K lines.
UW7-178
31.  SSH host key fingerprints are now displayed on the console shortly
     after boot is complete.  Run
         defadm ssh-host-key-fingerprints
     to see the configuration options.
UW7-199
34.  Updated the /usr/include/sys/sockio.h header file for
     compatibility with the Xinuos gcc development Kit.
UW7-146
Changes and fixes in libc,
UW7-146, UW7-147
35.  Improve mktemp() and mkstemp().
36.  Add mkdtemp(), mkostemp(), mkostemps(), mkstemps(), arc4random(),
     arc4random_buf(), arc4random_uniform(), getentropy, and
     explicit_bzero().
37.  Add _SC_LOGIN_NAME_MAX and _SC_HOST_NAME_MAX, _SC_TTY_NAME_MAX,
     to sysconf().
38.  Add _SC_GETGR_R_SIZE_MAX, and _SC_GETPW_R_SIZE_MAX to sysconf().
39.  Add hooks to clock_getres(), clock_gettime(), clock_settime(), and
     clock_nanosleep() syscalls.
40.  Add nanosleep().
41.  Enhance realpath() and add canonicalize_file_name().
42.  Update sysconf for TTY_NAME_MAX, add posix_memalign() and memmem()
43.  Add getopt_long(), getopt_long_only(), err(), err_set_exit(),
     err_set_file(), errc(), errx(), verr(), verrc(), verrx(), vwarn(),
     vwarnc(), vwarnx(), warn(), warnc(), warnx().
44.  Keep setlocale() from core dumping when passed a category
     greater than LC_ALL.
45.  Add dirfd(), strsep(), execvpe(), posix_spawn(), posix_spawnp(),
     posix_spawn_file_actions_init(), posix_spawn_file_actions_destroy(),
     posix_spawn_file_actions_addopen(), posix_spawn_file_actions_adddup2(),
     posix_spawn_file_actions_addclose(), posix_spawnattr_init(),
     posix_spawnattr_destroy(), posix_spawnattr_getflags(),
     posix_spawnattr_getpgroup(), posix_spawnattr_getschedparam(),
     posix_spawnattr_getschedpolicy(), posix_spawnattr_getsigdefault(),
     posix_spawnattr_getsigmask(), posix_spawnattr_setflags(),
     posix_spawnattr_setpgroup(), posix_spawnattr_setschedparam(),
     posix_spawnattr_setschedpolicy(), posix_spawnattr_setsigdefault(),
     posix_spawnattr_setsigmask(), and fdopendir().
     Add getdelim(), and getline().
     or later).
46.  Changes in libthread
     Fix pthread_rwlock_init().
     Add clock_nanosleep().
     UW7-146
47.  Fix packaging errors:
     sys/osocket.h, sys/sd01.h and sys/uadmin.h were left out of
     previous patches.
48.  The following includes, libraries, utilities, and device drivers have
      been fixed/added/enhanced to support OpenServer 6 Definitive 2018
      Maintenance Pack 1 and Update Pack 1.
      UW7-146 except where noted
Add declaration for dirfd(), and fdopendir():
   dirent.h

BSD error routines: err.h (new) getopt.h (new) getopt_long(), getopt_long_only().

Add _LC_LAST for the changes in libc's setlocale.c: locale.h

Add defines for AI_NUMERICHOST and AI_NUMERICSERV:
   netdb.h
Use new sigwait with gcc -pthread:
   signal.h
New header for posix_spawn, etc.:
   spawn.h   (new)

Add declaration for getdelim() and getline(). Wrap getdelim() and getline() in __EXTENSIONS__ : stdio.h

Add declarations for mkdtemp(), mkostemp(), mkostemps(), mkstemps(), arc4random(), arc4random_buf(), arc4random_uniform(), canonicalize_file_name(), and posix_memalign(): stdlib.h

Add declarations for memmem(), and strsep():
   string.h
Add declaration for explicit_bzero():
   strings.h

Changes to ease porting open source software: term.h UW7-233

Add declarations and defines for clock_* : time.h

Add declaration for nanosleep():
    unistd.h
Add declaration for getentropy(), lpathconf().

Add missing declarations for seteuid() and setegid() system calls.

Add missing sethostname() declaration.
Add declaration for execvpe():
   utime.h
Add declaration for lutime().
   sys/clock.h
   sys/clock_p.h
Modifications for new clock_* syscalls:
   sys/pathname.h
Add declarations for trailing slash fixes:
   sys/poll.h
(UW7-154)

Reduce differences with the UnixWare 7 source base. Declare poll_k return to be int rather than implying: sys/stat.h

Add declaration for lchmod().
Modifications for new clock_* system calls:
   sys/syscall.h

Add SYS_lchmod, SYS_lpathconf, SYS_lutime, SYS_clockgetres, SYS_clockgettime, SYS_clocksettime, and SYS_clocknanosleep defines: sys/syslog.h

Add missing declaration for vsyslog():
   sys/time.h
Add defines for clock_* :
   sys/types.h

Add blksize_t, clockid_t, suseconds_t, and timer_t data types: sys/unistd.h

Add defines for _SC_LOGIN_NAME_MAX, _SC_HOST_NAME_MAX, _SC_TTY_NAME_MAX, _SC_GETGR_R_SIZE_MAX, and _SC_GETPW_R_SIZE_MAX for sysconf(): sys/user.h

Modifications for new clock_* system calls: fs, procfs, svc, name, acpi, and audit device drivers

Add lchmod(), lpathconf(), lutime() system calls fs device driver.

Bring in trailing slash fixes: proc, util driver (UW7-154)

Update kernel device drivers for new clock_* system calls: proc driver

kmdt, kvm, Platform licensing fixes: v3compat, ccnv, kdb, kdb_util, and scodb device drivers kd, inet, proc device drivers

Add support in getaddrinfo() for AI_NUMERICHOST and AI_NUMERICSERV: libsocket

auditmap, truss:
   Add lchmod(), lpathconf(), lutime() syscalls
brand:
   "brand -o <id>" now only displays licenses with ID <id>
   (UW7-189)

Add -j option for update pack license.

installf
   Fix for relative symlinks.

man Corrections for man pages with colon in file name. Find pages in section n.

UW7-226
ksh
   Provide use_builtin fix
D49
New utilities:
   sha, sha1, sha256, sha384, sha512
emergency recovery:
   Add rand device driver to:
      /usr/lib/drf/conframdfs
      /usr/lib/drf/drfram.proto
      /usr/lib/drf/mini_kernel
      /usr/lib/drf/prep_flop
/usr/sadm/install/bin/pkginstall
/usr/sadm/install/bin/pkgremove
  Add version information to email messages.
49.  Add various manual pages; see the Contents section below for a listing.
50.  Updated /usr/ccs/bin/debug for new system calls added to enable
     Update Pack 1.
     (UW7-147)
51.  Fix typo in /etc/nfs preventing proper nfs shutdown.
     (OSR6-184)
52.  Bring in lpd fixes from OSR5
     /usr/lib/lp/lpd/cancel
     /usr/lib/lp/lpd/lpmove
     /usr/lib/lpd
     (OSR6-183)
53.  Copying a file to a symlink of a file, would remove the symlink
     and create a new file.
     /usr/bin/copy
     (OSR5-183)
54.  Enable ACLs (dac driver) like UnixWare for samba, rsync, etc.

The following fixes were first provided in OSS726J and are also provided in OSS726K:

55.  Bring in metamail from UnixWare for mailx.
56.  Build /usr/bin/id on UnixWare so it is NSS aware.
     (OSR6-192)
57.  useradd was leaving incorrect owner on auth files.
     (OSR6-189)
58.  Add some more modern options (-and, -gid, -not, -print0, -uid)
     to /u95/bin/find
59.  /u95/bin/touch: add -h option to change time on symbolic link.
OSS726K also provides these fixes:
60.  /etc/hw now detects KVM on modern AMD processors.

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer 6 Definitive 2018
----------------------------------------------------------
I. Software Notes and Recommendations
1.  If your system has an AHCI controller, you should also install
    the revised AHCI device driver (version 2.0a or later).
2.  If you have any questions concerning this supplement, please
    contact your Xinuos software supplier or your Xinuos Support
    Representative.
3.  Starting with OSS726D:
By default, systems now halt on panic instead of shutting down or
rebooting.  If you prefer that the system either shuts down or
reboots on panic, set the new PANICHALT variable to N and set
PANICBOOT accordingly.
4.  Starting with OSS726F:
Any existing shell scripts which expect an error code when the
rm -f command has no files will need to be manually updated
given the new standard to quietly return.
----------------------------------------------------------
II. Installation Instructions
To install OSS726K follow these steps:
1. Login as root

2. Create an empty directory, such as /tmp/oss726k, to which the patch will be downloaded.

3. Download the OSS726K patch file oss726k_vol.tar to the directory
   created in step 2.  After the download is complete, change
   to the directory created in step 2 and run the following to
   command to verify the integrity of the download:
openssl sha256 oss726k_vol.tar
               The output should be:
SHA256 (oss726k_vol.tar) = 805aec9a099f9242947dd2ef49cbfafa728c5c001ed4b06d627aac17c45a0fb2

After verifying the sums match, extract the media image files:

tar xvf oss726k_vol.tar

4. Run the Software Manager with the command:

scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/oss726k" (or the directory where you unwound the OSS726K patch file oss726k_vol.tar in step 3) and choose "OK."

9. When prompted to select software to install, make sure that
   the "OSS726K" entry is highlighted.  Choose "Install".
10. Once installation of Support Level Supplement (SLS) OSS726K is
    complete, exit the Software Manager, by selecting "Exit"
    from the "Host" menu.

11. Once the installation has completed, you can remove or archive the OSS726K patch file oss726k_vol.tar, the media image files, and the containing directory created in step 2.

12. You will need to reboot your system for all changes to take effect.

----------------------------------------------------------
III. Removal Instructions

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

1. Log in as root.
2. Execute the command:
scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight the "OSS726K" entry.

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.

6. You will need to reboot your system for all changes to take effect.

----------------------------------------------------------
IV. Contents

/etc/auth/system/files /etc/conf/interface.d/psm.2.3 /etc/conf/mdevice.d/psm_acpi /etc/conf/pack.d/acpi/Driver.o /etc/conf/pack.d/atup/Driver.o /etc/conf/pack.d/audit/Driver.o /etc/conf/pack.d/ccnv/Driver.o /etc/conf/pack.d/fs/Driver.o /etc/conf/pack.d/inet/Driver.o /etc/conf/pack.d/kd/Driver.o /etc/conf/pack.d/kdb/Driver.o /etc/conf/pack.d/kdb_util/Driver.o /etc/conf/pack.d/kma/Driver.o /etc/conf/pack.d/kma/space.c /etc/conf/pack.d/mod/Driver.o /etc/conf/pack.d/mps/Driver.o /etc/conf/pack.d/name/Driver.o /etc/conf/pack.d/nfs/Driver.o /etc/conf/pack.d/pci/Driver.o /etc/conf/pack.d/proc/Driver.o /etc/conf/pack.d/procfs/Driver.o /etc/conf/pack.d/psm_acpi/Driver.o /etc/conf/pack.d/psm_apic/Driver.o /etc/conf/pack.d/psm_cfgtables/Driver.o /etc/conf/pack.d/psm_msi/Driver.o /etc/conf/pack.d/sc01/Driver.o /etc/conf/pack.d/scodb/Driver.o /etc/conf/pack.d/sd01/Driver.o /etc/conf/pack.d/svc/Driver.o /etc/conf/pack.d/util/Driver.o /etc/conf/pack.d/v3compat/Driver.o /etc/conf/sdevice.d/psm_acpi /etc/copyrights/z_oss726 /etc/default/ssh-host-key-fingerprints /etc/expirewarning /etc/hw /etc/mail/mailx.rc /etc/nfs /etc/pam.d/mail /etc/pam.d/other /etc/rc.d/ssh-host-key-fingerprints /etc/setclk /etc/setclock /hdboot/bootmsgs /osr5/usr/lib/libc.a /osr5/usr/lib/libc.so /osr5/usr/lib/libc.so.1 /osr5/usr/lib/libp/libc.a /sbin/md5 /sbin/nologin /sbin/sha /sbin/sha1 /sbin/sha256 /sbin/sha384 /sbin/sha512 /tcb/bin/auditmap /u95/bin/awk /u95/bin/comm /u95/bin/copy /u95/bin/cut /u95/bin/dd /u95/bin/fgrep /u95/bin/find /u95/bin/fold /u95/bin/grep /u95/bin/hd /u95/bin/head /u95/bin/in.tftpd /u95/bin/join /u95/bin/nawk /u95/bin/od /u95/bin/paste /u95/bin/pr /u95/bin/rm /u95/bin/sed /u95/bin/sort /u95/bin/split /u95/bin/tail /u95/bin/tftp /u95/bin/touch /u95/bin/uniq /u95/bin/use_builtin /u95/bin/wc /usr/adm/install/admin/check /usr/adm/install/bin/pkginstall /usr/adm/install/bin/pkgremove /usr/bin/id /usr/bin/installf /usr/bin/mail /usr/bin/mailto /usr/bin/man /usr/bin/md5 /usr/bin/metamail /usr/bin/mimencode /usr/bin/pkgadd /usr/bin/pkgchk /usr/bin/pkginfo /usr/bin/pkgmk /usr/bin/pkgparam /usr/bin/pkgproto /usr/bin/pkgrm /usr/bin/pkgtrans /usr/bin/rm /usr/bin/sha /usr/bin/sha1 /usr/bin/sha256 /usr/bin/sha384 /usr/bin/sha512 /usr/bin/splitmail /usr/bin/truss /usr/bin/whereis /usr/ccs/bin/debug /usr/ccs/bin/what /usr/ccs/lib/libc.a /usr/ccs/lib/libc.so /usr/ccs/lib/libp/libc.a /usr/ccs/lib/libp/libc.so /usr/ccs/lib/libp/libc.so.1 /usr/include/CC/cstdio /usr/include/CC/iostream.h /usr/include/CC/yvals.h /usr/include/ctype.h /usr/include/dirent.h /usr/include/err.h /usr/include/fcntl.h /usr/include/float.h /usr/include/getopt.h /usr/include/inttypes.h /usr/include/limits.h /usr/include/locale.h /usr/include/math.h /usr/include/net/bpf.h /usr/include/net/if.h /usr/include/netdb.h /usr/include/pthread.h /usr/include/setjmp.h /usr/include/signal.h /usr/include/spawn.h /usr/include/stdarg.h /usr/include/stddef.h /usr/include/stdint.h /usr/include/stdio.h /usr/include/stdlib.h /usr/include/string.h /usr/include/strings.h /usr/include/sys/cdefs.h /usr/include/sys/clock.h /usr/include/sys/clock_p.h /usr/include/sys/kmem.h /usr/include/sys/mkdev.h /usr/include/sys/osocket.h /usr/include/sys/pathname.h /usr/include/sys/poll.h /usr/include/sys/privilege.h /usr/include/sys/psm.h /usr/include/sys/resource.h /usr/include/sys/sd01.h /usr/include/sys/sockio.h /usr/include/sys/stat.h /usr/include/sys/syscall.h /usr/include/sys/syslog.h /usr/include/sys/time.h /usr/include/sys/types.h /usr/include/sys/uadmin.h /usr/include/sys/unistd.h /usr/include/sys/user.h /usr/include/tcpd.h /usr/include/term.h /usr/include/time.h /usr/include/unistd.h /usr/include/utime.h /usr/include/varargs.h /usr/include/vm/kma_p.h /usr/include/wchar.h /usr/lib/drf/conframdfs /usr/lib/drf/drfram.proto /usr/lib/drf/mini_kernel /usr/lib/drf/prep_flop /usr/lib/libc.so.1 /usr/lib/libiaf.a /usr/lib/libiaf.so /usr/lib/libp/libthread.so.1 /usr/lib/libp/libthreadT.so.1 /usr/lib/libsocket.so.2 /usr/lib/libthread.so.1 /usr/lib/libthreadT.so.1 /usr/lib/libutil.so /usr/lib/locale/en/LC_MESSAGES/sco_pmd.cat /usr/lib/locale/es/LC_MESSAGES/sco_pmd.cat /usr/lib/lp/lpd/cancel /usr/lib/lp/lpd/lpmove /usr/lib/lpd /usr/lib/mail/metamail/comparenocase /usr/lib/mail/metamail/getfilename /usr/lib/mail/metamail/richtext /usr/lib/mail/metamail/showaudio /usr/lib/mail/metamail/showexternal /usr/lib/mail/metamail/shownonascii /usr/lib/mail/metamail/showpartial /usr/lib/mail/metamail/showpicture /usr/lib/mailx/mailx.help /usr/lib/mailx/mailx.help.~ /usr/lib/mailx/mailx.rc /usr/lib/scoadmin/license/licenseMgr /usr/lib/scoadmin/msg/en/licenseMgr.cat /usr/lib/scoadmin/msg/es/licenseMgr.cat /usr/lib/scoadmin/msg/it/licenseMgr.cat /usr/lib/scoadmin/msg/ja/licenseMgr.cat /usr/man/cat1/md5.1 /usr/man/cat1/sha.1 /usr/man/cat1/sha1.1 /usr/man/cat1/sha256.1 /usr/man/cat1/sha384.1 /usr/man/cat1/sha512.1 /usr/man/cat1/whereis.1 /usr/man/cat2/clock_getres.2 /usr/man/cat2/clock_gettime.2 /usr/man/cat2/clock_nanosleep.2 /usr/man/cat2/clock_settime.2 /usr/man/cat2/nanosleep.2 /usr/man/cat3/arc4random.3 /usr/man/cat3/arc4random_buf.3 /usr/man/cat3/arc4random_uniform.3 /usr/man/cat3/err.3 /usr/man/cat3/err_set_exit.3 /usr/man/cat3/err_set_file.3 /usr/man/cat3/errc.3 /usr/man/cat3/errx.3 /usr/man/cat3/execvpe.3 /usr/man/cat3/getopt_long.3 /usr/man/cat3/getopt_long_only.3 /usr/man/cat3/memmem.3 /usr/man/cat3/mkdtemp.3 /usr/man/cat3/mkostemp.3 /usr/man/cat3/mkostemps.3 /usr/man/cat3/mkstemp.3 /usr/man/cat3/mkstemps.3 /usr/man/cat3/mktemp.3 /usr/man/cat3/posix_spawn.3 /usr/man/cat3/posix_spawn_file_actions_addclose.3 /usr/man/cat3/posix_spawn_file_actions_adddup2.3 /usr/man/cat3/posix_spawn_file_actions_addopen.3 /usr/man/cat3/posix_spawn_file_actions_destroy.3 /usr/man/cat3/posix_spawn_file_actions_init.3 /usr/man/cat3/posix_spawnattr_destroy.3 /usr/man/cat3/posix_spawnattr_getflags.3 /usr/man/cat3/posix_spawnattr_getpgroup.3 /usr/man/cat3/posix_spawnattr_init.3 /usr/man/cat3/posix_spawnattr_setflags.3 /usr/man/cat3/posix_spawnattr_setpgroup.3 /usr/man/cat3/posix_spawnp.3 /usr/man/cat3/strsep.3 /usr/man/cat3/verr.3 /usr/man/cat3/verrc.3 /usr/man/cat3/verrx.3 /usr/man/cat3/vwarn.3 /usr/man/cat3/vwarnc.3 /usr/man/cat3/vwarnx.3 /usr/man/cat3/warn.3 /usr/man/cat3/warnc.3 /usr/man/cat3/warnx.3 /usr/man/cat8/nologin.8 /usr/man/man1/md5.1 /usr/man/man1/sha.1 /usr/man/man1/sha1.1 /usr/man/man1/sha256.1 /usr/man/man1/sha384.1 /usr/man/man1/sha512.1 /usr/man/man1/whereis.1 /usr/man/man2/clock_getres.2 /usr/man/man2/clock_gettime.2 /usr/man/man2/clock_nanosleep.2 /usr/man/man2/clock_settime.2 /usr/man/man2/nanosleep.2 /usr/man/man3/arc4random.3 /usr/man/man3/arc4random_buf.3 /usr/man/man3/arc4random_uniform.3 /usr/man/man3/err.3 /usr/man/man3/err_set_exit.3 /usr/man/man3/err_set_file.3 /usr/man/man3/errc.3 /usr/man/man3/errx.3 /usr/man/man3/execvpe.3 /usr/man/man3/getopt_long.3 /usr/man/man3/getopt_long_only.3 /usr/man/man3/memmem.3 /usr/man/man3/mkdtemp.3 /usr/man/man3/mkostemp.3 /usr/man/man3/mkostemps.3 /usr/man/man3/mkstemp.3 /usr/man/man3/mkstemps.3 /usr/man/man3/mktemp.3 /usr/man/man3/posix_spawn.3 /usr/man/man3/posix_spawn_file_actions_addclose.3 /usr/man/man3/posix_spawn_file_actions_adddup2.3 /usr/man/man3/posix_spawn_file_actions_addopen.3 /usr/man/man3/posix_spawn_file_actions_destroy.3 /usr/man/man3/posix_spawn_file_actions_init.3 /usr/man/man3/posix_spawnattr_destroy.3 /usr/man/man3/posix_spawnattr_getflags.3 /usr/man/man3/posix_spawnattr_getpgroup.3 /usr/man/man3/posix_spawnattr_init.3 /usr/man/man3/posix_spawnattr_setflags.3 /usr/man/man3/posix_spawnattr_setpgroup.3 /usr/man/man3/posix_spawnp.3 /usr/man/man3/strsep.3 /usr/man/man3/verr.3 /usr/man/man3/verrc.3 /usr/man/man3/verrx.3 /usr/man/man3/vwarn.3 /usr/man/man3/vwarnc.3 /usr/man/man3/vwarnx.3 /usr/man/man3/warn.3 /usr/man/man3/warnc.3 /usr/man/man3/warnx.3 /usr/man/man8/nologin.8 /usr/sbin/brand /usr/sbin/crash /usr/sbin/nologin /usr/sbin/sco_pmd /usr/share/lib/mailx/C/mailx.help /usr/share/lib/mailx/C/mailx.help.~

----------------------------------------------------------
Copyright (c) 2019-2025 Xinuos, Inc.  All Rights Reserved.

From the Xinuos technical article database, record 128186. Reproduced with permission. The original is at www.sco.com/ta/128186, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.