Technical article 128149

How to get started with samba4 on UnixWare 7 or OpenServer6 Definitive as standalone fileserver

OpenServer Definitive 2018UnixWare 7 Definitive 2018OpenServer 6UnixWare 7

Written · Last revised

Problem

How to get started with samba4 on UnixWare 7 or OpenServer6 Definitive as standalone fileserver

Solution

This procedure describes how to configure samba4 on UnixWare7 or OpenServer6 Definitive 2018 (D2M1/M2) as standalone fileserver

-Make sure Update Pack 1 is installed on the UW7D or OSR6D installation. If not, purchase and install an UP1 license for Definitive and run patchck to install (MP1 and) UP1.

-If you have samba3 installed, you should remove it using the command: # /opt/xinuos/sbin/setup-samba.sh -r The samba3 configuration files are saved to a tar archive.

-Configure samba4:
 # /opt/xinuos/sbin/setup-samba.sh
 Installing smb.conf

a) Stand Alone Server d) Active Directory Domain Member

Which one? a Enter Workgroup/Domain name: [MYGROUP] Workgroup name set to "MYGROUP".

Enter Machine name: [scosysv] Machine name set to "scosysv".

Will this system use WINS (recommended)? [Yes]
set samba password for root
New SMB password: *****
Retype new SMB password: *****
Added user root.
Make a note of that password, you'll need it
Press return to continue
Installing krb5.conf
Installing user.map
Enable starting Samba daemons at boot time? (recommended) [Yes]
Start Samba daemons now? (recommended) [Yes]

Make sure /etc/opt/xinuos/samba/smb.conf is configured like you want it.

-The samba has a default 'tmp' share that includes all files in /var/tmp/.Samba. This share can be used for testing.

-Create a file in this samba test directory:
 # ls >/var/tmp/.Samba/list.txt
-Test samba using /opt/xinuos/bin/smbclient
 #smbclient //<hostname or IP>/tmp -U <samba_user>
 Enter MYGROUP\root's password: ******
 Try "help" to get a list of possible commands.
 smb: \> dir
  .                    D        0  Fri Nov  1 16:22:35 2024
  ..                   D        0  Fri Nov  1 16:16:04 2024
  list.txt             N      319  Fri Nov  1 16:22:35 2024
40302704 blocks of size 1024. 35615002 blocks available
smb: \> get list.txt
 getting file \list.txt of size 319 as list.txt (24.0 KiloBytes/sec)
 (average 24.0 KiloBytes/sec)
smb: \>
smb: \> put list1.txt list2.txt
 putting file list1.txt as \list2.txt (-5.8 kb/s) (average 0.0 kb/s)
smb: \> dir
  .                    D        0  Fri Nov  1 16:30:55 2024
  ..                   D        0  Fri Nov  1 16:16:04 2024
  list.txt             N      319  Fri Nov  1 16:22:35 2024
  list2.txt            N      319  Fri Nov  1 16:30:55 2024

40302704 blocks of size 1024. 35614988 blocks available smb: \>quit

-Accessing the 'homes' share:
 As a default the 'homes' share is enabled in smb.conf
 To access this share the /%H/Samba folder must be created
 with the correct access rights.
 %H is the homedirectory of a unix user.
 # mkdir -p /<unix_user_homedir>/Samba
 # chmod -R <username> /<unix_user_homedir>/Samba
 # chgrp -R <user_group> /<unix_user_homedir>/Samba
 Now the share can accessed using:
 # smbclient //<IP_or_servername>/homes -U <user>
 On windows this homes share can be accessed by user <user>
 as \\<IP_or_servername>\homes.
-Add a new samba user and password
 Before you can add a samba user, a unix user with the same username
 must exist. The samba password may be different from the unix password
 # smbpasswd -a <samba_user>    #Add samba user and password
 # smbpasswd -e <samba_user>    #Enable samba user
Useful tools while configuring and debugging samba:
 -Check syntax and view settings of smb.conf
 # testparm -s     (Check and view modified settings in smb.conf
 # testparm -s -v  (check and view modified and default settings)
-List all samba users
# pdbedit -L

-View connected samba users and active shares on the server. Also displays the smb protocol version used. # smbstatus

-Remove all Xinuos samba4 config files
# /opt/xinuos/sbin/setup-samba.sh -u

See also

TA128085, "How to get started with samba4 on UnixWare 7 or OpenServer6 Definitive using windows domain integration"

From the Xinuos technical article database, record 128149. Reproduced with permission. The original is at www.sco.com/ta/128149, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.