Problem
How to create an Openserver6 or Unixware7 Definitive 2018 Virtual Machine on Proxmox
Solution
How to create an Openserver6 or Unixware7 Definitive 2018 Virtual Machine on Proxmox
You need to login to the Xinuos site to download the latest isos: https://www.xinuos.com/product/sco-openserver-6-definitive-2018 https://www.xinuos.com/product/sco-unixware-7-definitive-2018
Place the iso in the /var/lib/vz/template/iso/ directory on your Proxmox server.
In the Proxmox GUI click the Create VM Button. At the General tab, enter the VM name for your new VM and then press the Next button At the OS tab, select the OpenServer or Unixware ISO image from the pull-down menu. Set the Guest OS type to: Other and then press the Next button. At the System tab, check that the SCSI Controller is set to: VirtIO SCSI single and then press the Next button. In the Disks tab, set the Disk Bus/Device to: VirtIO-Block Set the root Disk size as needed (default is 32GiB) and then press the Next button. At the CPU tab, select the number of CPU Sockets and Cores needed for your VM and then press the Next button. At the Memory tab, select the Memory size needed for your VM and then press the Next button. At the Network tab, select the Network Bridge you want to use for your networking from the pull-down menu (defaults to vmbr0). Set the Network Card Model from the pull-down menu to VirtIO(paravirtualized) and then press the Next button. Click Finish to create the VM.
Now you can start the VM by selecting the created VM name => console => Start VM The VM will boot from the selected iso to install the OS You can use the default loaded vtblk disk HBA and the vtnet network driver.
Note for OpenServer6: A reboot after OS installation will boot from harddisk. Then you can mount the OpenServer6D iso using the 'mount /dev/cd0 /mnt' command and execute the command '/mnt/upgrade.sh' to install MP1 and, optionally, UP1. UP1 is only installed when a UP1 license was installed. Execute the patchck command to check if newer OS updates are available. Install any applicable updates.
Note for Unixware7D: When the cdrom installation is completed, you will be asked to remove the CDROM. Navigate from Console to Hardware, edit CD/DVD and select "Do not use any media". Navigate to console again and press <Enter> to reboot. After reboot execute the patchck command to install MP1 and, optionally, UP1.
For more details about MP1/UP1 for OpenServer6 Definitive 2018: https://www.xinuos.com/wp-content/uploads/OpenServer6D2M2-GSGReleaseNotes-20240827.pdf
For more details about MP1/UP1 for Unixware7 Definitive 2018: https://www.xinuos.com/wp-content/uploads/UnixWare7D2M1-MP1UP1-ReleaseNotes-240123.pdf