Technical article 128085

How to get started with samba4 on UnixWare 7 or OpenServer6 Definitive using windows domain integration

OpenServer Definitive 2018UnixWare 7 Definitive 2018OpenServer 6UnixWare 7

Written · Last revised

Problem

How to configure samba4 with windows domain integration on UnixWare 7 or OpenServer6 Definitive 2018

Solution

This procedure describes how to configure samba4 on UnixWare7 or OpenServer6 Definitive 2018 (D2M1/M2) with windows domain integration.

-Make sure Update Pack 1 is installed on the UW7D or OSR6D installation. If not, purchase and install an Update Pack 1 license for Definitive Run patchck to install the Update Pack 1.

-Check that the system time on the 6D/7D server is in sync with the windows domainserver. Setup an NTP client on the 6D/7D server when out of sync. See TA111921 for help.

-Define the Windows Domain server as nameserver and add
 the domainname to your /etc/resolv.conf
 # cat /etc/resolv.conf
 nameserver 172.24.123.1
 domain mydomain.com
-Configure your system on the Windows DNS server.
 Define the Forward and Reverse Lookup Zones
 *check reverse dns lookup
 # host 172.24.123.195
 195.123.24.172.in-addr.arpa domain name pointer
 definitive.mydomain.com.
 *Check forward dns lookup
 # host definitive.mydomain.com
 definitive.mydomain.com has address 172.24.123.195

-Check if the 'hostname' command returns the correct domainname. if not, set the correct domainname using 'hostname -s".

-If you have samba3 installed, you should remove it using the command: # /opt/xinuos/sbin/setup-samba.sh -r The samba3 configuration files are saved to a tar archive.

-Setup the samba4 configuration files
 # /opt/xinuos/sbin/setup-samba.sh
 Installing smb.conf

a) Stand Alone Server d) Active Directory Domain Member

       Which one?  d
Enter Machine name: [definitive]
Machine name set to "definitive".

Installing krb5.conf Installing user.map Enable starting Samba daemons at boot time? (recommended)[Yes]

Start Samba daemons now? (recommended) [Yes]

Make sure /etc/opt/xinuos/samba/smb.conf is configured like you want it.

-Join the 6D/7D server to the windows domain. Use the
 windows credentials of a domain administrator to join.
 # net ads join -U Administrator@mydomain.com
 Using short domain name -- mydomain
 Joined 'definitive' to dns domain 'mydomain.com'
         -Restart the samba processes and check that smbd, nmbd and
          winbindd processes are all running.
          # /etc/init.d/samba-xinuos restart
          # ps -ef | grep -e mbd -e winbind
             root  2196  2195   TS  80  0 12:50:41 ?        0:00
         /opt/xinuos/sbin/winbindd -l/var/opt/xinuos/samba/log
-s/etc/opt/xinuos/samba/s
             root  2188  2186   TS  80  0 12:50:31 ?        0:00
/opt/xinuos/sbin/smbd -D -s/etc/opt/xinuos/samba/smb.conf
             root  2189  2186   TS  80  0 12:50:31 ?        0:00
/opt/xinuos/sbin/smbd -D -s/etc/opt/xinuos/samba/smb.conf
             root  2195     1   TS  80  0 12:50:41 ?        0:00
/opt/xinuos/sbin/winbindd -l/var/opt/xinuos/samba/log
         -s/etc/opt/xinuos/samba/s
             root  2190     1   TS  80  0 12:50:31 ?        0:00
/opt/xinuos/sbin/nmbd -D -l/var/opt/xinuos/samba/log
         -s/etc/opt/xinuos/samba/sm
             root  2186     1   TS  80  0 12:50:31 ?        0:00
/opt/xinuos/sbin/smbd -D -s/etc/opt/xinuos/samba/smb.conf
             root  2194  2186   TS  80  0 12:50:32 ?        0:00
/opt/xinuos/sbin/smbd -D -s/etc/opt/xinuos/samba/smb.conf

-The samba has as default a 'tmp' share that includes all files in /var/tmp/.Samba. This share can be used for test.

-Create a test file in this samba test directory:
# ls >/var/tmp/.Samba/list.txt
# smbclient  //definitive/tmp -U <Windows_User>
Enter <Domain>\<Windows_User>'s password:

Try "help" to get a list of possible commands.

         smb: \> dir
         .                                   D        0  Fri Nov
10 12:03:41 2023
         ..                                  D        0  Fri Nov
10 09:29:20 2023
         list.txt                            N      195  Fri Nov
10 12:03:01 2023
                550912 blocks of size 1024. 550800 blocks available

smb: \> get list.txt getting file \list.txt of size 195 as list.txt (38.1 KiloBytes/sec) (average 38.1 KiloBytes/sec)

         smb: \> put list.txt list2.txt
         putting file list.txt as \list2.txt (63.5 kb/s) (average
63.5 kb/s)
         smb: \> dir
           .                                   D        0  Fri Nov
10 12:03:41 2023
           ..                                  D        0  Fri Nov
10 09:29:20 2023
           list.txt                            N      195  Fri Nov
10 12:03:01 2023
           list2.txt                           N      195  Fri Nov
10 12:46:36 2023
                550912 blocks of size 1024. 550800 blocks available
smb: \> quit

-Test access to \\definitive\tmp on a windows environment and login with windows domain user credentials.

-Accessing the 'homes' share:
 As a default the 'homes' share is enabled in smb.conf
 To access this share the /%H/Samba/%U must be created and having
 the correct access rights.
 %H is the homedirectory of a windows user. %U is the username.
 Both are all lowercase characters names.
 Executing the command 'wbinfo -i <domain_user>' displays the
 homedirectory in its 6th field.
 wbinfo output example:
 winuser:*:21113:20513:winuser:/home/mydomain/winuser:/bin/ksh
 # mkdir -p /home/mydomain/winuser/Samba
 # chmod -R winuser /home/mydomain/winuser/Samba
 # chgrp -R "domain users" /home/mydomain/winuser/Samba
 Now the share can accessed using:
 # smbclient //definitive/homes -U winuser
 On windows this homes share can be accessed just by user winuser
 as \\definitive\winuser.
Usefull tools used while debugging samba:
-Check syntax and view settings in smb.conf
# testparm -s     (Check and view modified settings in smb.conf
# testparm -s -v  (check and view modified and default settings)

-View connected samba users and accessed shares on the server. Also displays the smb protocol version used. # smbstatus

-Display uid, username, gid and group name
# id <windows_user>
-Display all users in your domain
# wbinfo -u
-Display all groups in your domain
# wbinfo -g
-Report user info
# wbinfo -i <domain_user>
-Check if winbindd is running
# wbinfo -p
-Check the NETLOGON for your domain
# wbinfo -P
-Display details on remote ADS server
# net ads info
-Display machine account details
# net ads status -U <domain_user>
-Remove all Xinuos samba4 config files
# /opt/xinuos/sbin/setup-samba.sh -u

See also

TA128149, "How to get started with samba4 on UnixWare 7 or OpenServer6 Definitive as standalone fileserver"

From the Xinuos technical article database, record 128085. Reproduced with permission. The original is at www.sco.com/ta/128085, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.