Problem
What problems are fixed by Support Level Supplement (SLS) OSS726I, the OpenServer 6 Definitive 2018 (D2M1) Supplement 2?
Solution
NOTE: By default, OpenServer 6 Definitive now halts if a panic is
encountered. For details please see the "Software Notes and
Recommendations" section below.The following fixes were first provided in OSS726A and are also provided in OSS726I:
1. Fix an RD1000 panic.Systems using the AHCI device driver and an attached but empty Dell PowerVault RD1000 Removable Disk Storage device would panic on start up.
To fix these panics requires both this escalation patch for the
sd01 device driver and to use version 2.0a (or later) of the
AHCI device driver. You can separately download that device
driver or install it via patchck.The sd01 portion of the fix is to change a recursive loop to an iterative loop.
The ahci portion of the fix is to resolve an event registration issue.
OSR6-1132. Fix a mkdev hd command failure when configuring a Dell PowerVault
RD1000 Removable Disk Storage hard disk. This error was
encountered:ERROR: One or more of the DDB files are not present/corrupt/inaccessible.
UX:ls:ERROR: Cannot access /dev/hba/hba*: no such file or directory.
An incorrect data conversion was fixed.OSR6-124The following fixes were first provided in OSS726B and are also provided in OSS726I:
3. Update header files to support GNU development system while
maintaining backward compatibility with the native compiler.UW7-1404. Avoid undefined WCHAR_MIN and WINT_MIN variables by setting
defaults if these variables are not defined elsewhere.UW7-1385. Add missing setenv and unsetenv declarations to stdlib.h
setenv/unsetenv were added to libc in 2006 but the declarations
were not added to stdlib.h.UW7-148The following fixes were first provided in OSS726C and are also provided in OSS726I:
6. Added the ACPI reset command to avoid keyboard issues when
using PS2_KEYBOARD=NO boot parameter. Previously the 8042
keyboard controller reset command was used in this scenario
which resulted in a system hang.UW7-1117. Updated the mkdev.h header file to support different definitions
for UDK and new development systems.UW7-1558. Initialize three RTCSTIME variables which are needed by the PSM
routines. Previously, invalid time settings at boot sometimes
causes a system hang.OSR6-148The following fixes were first provided in OSS726D and are also provided in OSS726I:
9. Add support for installing OpenServer 6 Definitive 2018 under the
KVM hypervisor on the CentOS operating system.UW7-15610. Provide a new boot parameter, PANICHALT. When set to Y the
system halts on panic and requires hard reboot instead of
automatically shutting down or rebooting. The default is Y.
If set to N then system behaves as per the PANICBOOT settings.OSR6-172OSS726E was used for Xinuos development of OSS726F; OSS726E was not publicly released.
The following fixes were first provided in OSS726F and are also provided in OSS726I:
12. Fixed an OpenServer 6 Definitive 2018 NFS bug so that OpenServer
now lists directory contents of mounted NFS shares that are
larger than two terabytes.UW7-12713. Additional revisions to header files and libraries to correct
some of the stdio helper functions. These functions were
provided in prior releases to aid in open source porting. This
SLS modifies:
__freadable()
__fwritable()
__fbufsiz() should have been __fbufsize()UW7-17314. The "rm -f" command with no specific files no longer returns an
error code. This conforms to the upcoming POSIX standard
http://austingroupbugs.net/view.php?id=542. It also matches
most other UNIX/BSD/Linux implementations and keeps open source
configure scripts from complaining. Any existing shell scripts
which expect an error code when the rm -f command has no files
will need to be manually updated given the new standard.UW7-29The following fixes were first provided in OSS726G and are also provided in OSS726I:
15. Corrected LD_PRELOAD so, when used, loads the libraries set by
LD_PRELOAD prior to any other libraries, including libc.so.1.UW7-18316. Updated the /usr/include/strings.h file to add declarations
needed for compiling some open source.UW7-13817. Fixed incorrect pkgadd warning messages that were displayed
when adding packages that contain linked files. Also did
minor source code consolidation to synchronize the
UnixWare 7 Definitive and Open Server 6 Definitive packaging
tools (pkg* commands).UW7-14318. Added the nologin command. nologin provides a disabled shell
security mechanism for UNIX daemon accounts. For more
information, after installation run: man nologinUW7-19319. Added the whereis command for locating binaries and manual
pages. For more information, after installation run:man whereisUW7-19320. Correct the permissions on /tmp, if incorrect.OSR6-167OSS726H was not publicly released.OSS726I also provides these fixes:21. The getprogname and setprogname functions are now in libc.
Also cleaned up a typdef redeclaration error.UW7-14622. Added IF_NAMESIZE to the /usr/include/net/if.h file, per the
IEEE Standard 1003.1-2017,
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/net_if.h.htmlUW7-14623. Provided in parallel with oss726i, avoid a system hang in version 2.0b
of the AHCI device driver when running a virtual machine under KVM.UW7-16124. Improved the hyper-visor detection code and updated the hw command to
show if the instance is running as a virtual machine.UW7-16225. Avoid null pointers which can otherwise cause hangs during ISL.UW7-16426. Integrated Kernel Memory Debugging Tool (kmdt) and an updated
crash utility. The kmdt is integrated into the kernel but must
be enabled before use, as described in the Software Notes and
Recommendations sction below.UW7-18627. Added missing data types to the types.h header file.UW7-20828. Modified these utilities in /u95/bin to be large-file aware:awk comm copy cut dd egrep
fgrep fold grep hd head in.tftpd join
nawk od paste pr sed sort split
tail tftp uniq wc whatUW7-17829. Modified the dd command to accept arguments larger than 2147483647.UW7-17830. Modified the tail command to handle more than 64K lines.UW7-17831. SSH host key fingerprints are now displayed on the console shortly
after boot is complete. Run
defadm ssh-host-key-fingerprints
to see the configuration options.UW7-19934. Updated the /usr/include/sys/sockio.h header file for
compatibility with the Xinuos gcc development Kit.UW7-146Changes and fixes in libc,
UW7-146, UW7-14735. Improve mktemp() and mkstemp().36. Add mkdtemp(), mkostemp(), mkostemps(), mkstemps(), arc4random(),
arc4random_buf(), arc4random_uniform(), getentropy, and
explicit_bzero().37. Add _SC_LOGIN_NAME_MAX and _SC_HOST_NAME_MAX, _SC_TTY_NAME_MAX,
to sysconf().38. Add _SC_GETGR_R_SIZE_MAX, and _SC_GETPW_R_SIZE_MAX to sysconf().39. Add hooks to clock_getres(), clock_gettime(), clock_settime(), and
clock_nanosleep() syscalls.40. Add nanosleep().41. Enhance realpath() and add canonicalize_file_name().42. Update sysconf for TTY_NAME_MAX, add posix_memalign() and memmem()43. Add getopt_long(), getopt_long_only(), err(), err_set_exit(),
err_set_file(), errc(), errx(), verr(), verrc(), verrx(), vwarn(),
vwarnc(), vwarnx(), warn(), warnc(), warnx().44. Keep setlocale() from core dumping when passed a category
greater than LC_ALL.45. Add dirfd(), strsep(), execvpe(), posix_spawn(), posix_spawnp(),
posix_spawn_file_actions_init(), posix_spawn_file_actions_destroy(),
posix_spawn_file_actions_addopen(), posix_spawn_file_actions_adddup2(),
posix_spawn_file_actions_addclose(), posix_spawnattr_init(),
posix_spawnattr_destroy(), posix_spawnattr_getflags(),
posix_spawnattr_getpgroup(), posix_spawnattr_getschedparam(),
posix_spawnattr_getschedpolicy(), posix_spawnattr_getsigdefault(),
posix_spawnattr_getsigmask(), posix_spawnattr_setflags(),
posix_spawnattr_setpgroup(), posix_spawnattr_setschedparam(),
posix_spawnattr_setschedpolicy(), posix_spawnattr_setsigdefault(),
posix_spawnattr_setsigmask(), and fdopendir().
Add getdelim(), and getline().
or later).46. Changes in libthread
Fix pthread_rwlock_init().
Add clock_nanosleep().
UW7-14647. Fix packaging errors:
sys/osocket.h, sys/sd01.h and sys/uadmin.h were left out of
previous patches.48. The following includes, libraries, utilities, and device drivers have
been fixed/added/enhanced to support OpenServer 6 Definitive 2018
Maintenance Pack 1 and Update Pack 1.
UW7-146 except where notedAdd declaration for dirfd(), and fdopendir():
dirent.hBSD error routines: err.h (new) getopt.h (new) getopt_long(), getopt_long_only().
Add _LC_LAST for the changes in libc's setlocale.c: locale.h
Add defines for AI_NUMERICHOST and AI_NUMERICSERV:
netdb.hUse new sigwait with gcc -pthread:
signal.hNew header for posix_spawn, etc.:
spawn.h (new)Add declaration for getdelim() and getline(). Wrap getdelim() and getline() in __EXTENSIONS__ : stdio.h
Add declarations for mkdtemp(), mkostemp(), mkostemps(), mkstemps(), arc4random(), arc4random_buf(), arc4random_uniform(), canonicalize_file_name(), and posix_memalign(): stdlib.h
Add declarations for memmem(), and strsep():
string.hAdd declaration for explicit_bzero():
strings.hChanges to ease porting open source software: term.h UW7-233
Add declarations and defines for clock_* : time.h
Add declaration for nanosleep():
unistd.hAdd declaration for getentropy(), lpathconf().Add missing declarations for seteuid() and setegid() system calls.
Add missing sethostname() declaration.Add declaration for execvpe():
utime.hAdd declaration for lutime().
sys/clock.h
sys/clock_p.hModifications for new clock_* syscalls:
sys/pathname.hAdd declarations for trailing slash fixes:
sys/poll.h
(UW7-154)Reduce differences with the UnixWare 7 source base. Declare poll_k return to be int rather than implying: sys/stat.h
Add declaration for lchmod().Modifications for new clock_* system calls:
sys/syscall.hAdd SYS_lchmod, SYS_lpathconf, SYS_lutime, SYS_clockgetres, SYS_clockgettime, SYS_clocksettime, and SYS_clocknanosleep defines: sys/syslog.h
Add missing declaration for vsyslog():
sys/time.hAdd defines for clock_* :
sys/types.hAdd blksize_t, clockid_t, suseconds_t, and timer_t data types: sys/unistd.h
Add defines for _SC_LOGIN_NAME_MAX, _SC_HOST_NAME_MAX, _SC_TTY_NAME_MAX, _SC_GETGR_R_SIZE_MAX, and _SC_GETPW_R_SIZE_MAX for sysconf(): sys/user.h
Modifications for new clock_* system calls: fs, procfs, svc, name, acpi, and audit device drivers
Add lchmod(), lpathconf(), lutime() system calls fs device driver.
Bring in trailing slash fixes: proc, util driver (UW7-154)
Update kernel device drivers for new clock_* system calls: proc driver
kmdt, kvm, Platform licensing fixes: v3compat, ccnv, kdb, kdb_util, and scodb device drivers kd, inet, proc device drivers
Add support in getaddrinfo() for AI_NUMERICHOST and AI_NUMERICSERV: libsocket
auditmap, truss:
Add lchmod(), lpathconf(), lutime() syscallsbrand:
"brand -o <id>" now only displays licenses with ID <id>
(UW7-189)Add -j option for update pack license.
installf
Fix for relative symlinks.man Corrections for man pages with colon in file name. Find pages in section n.
UW7-226ksh
Provide use_builtin fixD49New utilities:
sha, sha1, sha256, sha384, sha512emergency recovery:
Add rand device driver to:
/usr/lib/drf/conframdfs
/usr/lib/drf/drfram.proto
/usr/lib/drf/mini_kernel
/usr/lib/drf/prep_flop/usr/sadm/install/bin/pkginstall
/usr/sadm/install/bin/pkgremove
Add version information to email messages.49. Add various manual pages; see the Contents section below for a listing.50. Updated /usr/ccs/bin/debug for new system calls added to enable
Update Pack 1.
(UW7-147)51. Fix typo in /etc/nfs preventing proper nfs shutdown.
(OSR6-184)52. Bring in lpd fixes from OSR5
/usr/lib/lp/lpd/cancel
/usr/lib/lp/lpd/lpmove
/usr/lib/lpd
(OSR6-183)53. Copying a file to a symlink of a file, would remove the symlink
and create a new file.
/usr/bin/copy
(OSR5-183)This supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer 6 Definitive 2018----------------------------------------------------------I. Software Notes and Recommendations1. If your system has an AHCI controller, you should also install
the revised AHCI device driver (version 2.0a or later).2. If you have any questions concerning this supplement, please
contact your Xinuos software supplier or your Xinuos Support
Representative.3. Starting with OSS726D:By default, systems now halt on panic instead of shutting down or
rebooting. If you prefer that the system either shuts down or
reboots on panic, set the new PANICHALT variable to N and set
PANICBOOT accordingly.4. Starting with OSS726F:Any existing shell scripts which expect an error code when the
rm -f command has no files will need to be manually updated
given the new standard to quietly return.----------------------------------------------------------II. Installation InstructionsTo install OSS726I follow these steps:1. Login as root2. Create an empty directory, such as /tmp/oss726i, to which the patch will be downloaded.
3. Download the OSS726I patch file oss726i_vol.tar to the directory
created in step 2. After the download is complete, change
to the directory created in step 2 and run the following to
command to verify the integrity of the download:openssl sha256 oss726i_vol.tar The output should be:
SHA256 (oss726i_vol.tar) = 47b978300fd55c639d183f2e5c375e7c875b5080425f4c1b7364eeeddf7dfe20After verifying the sums match, extract the media image files:
tar xvf oss726i_vol.tar4. Run the Software Manager with the command:
scoadmin softwareor double-click on the Software Manager icon in the desktop.
5. Pull down the "Software" menu and select "Install New".
6. When prompted for the host from which to install, choose the local machine and then "Continue".
7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".
8. When prompted for the "Image Directory", enter "/tmp/oss726i" (or the directory where you unwound the OSS726I patch file oss726i_vol.tar in step 3) and choose "OK."
9. When prompted to select software to install, make sure that
the "OSS726I" entry is highlighted. Choose "Install".10. Once installation of Support Level Supplement (SLS) OSS726I is
complete, exit the Software Manager, by selecting "Exit"
from the "Host" menu.11. Once the installation has completed, you can remove or archive the OSS726I patch file oss726i_vol.tar, the media image files, and the containing directory created in step 2.
12. You will need to reboot your system for all changes to take effect.
----------------------------------------------------------III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Highlight the "OSS726I" entry.4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager.
6. You will need to reboot your system for all changes to take effect.
----------------------------------------------------------IV. Contents/etc/conf/interface.d/psm.2.3 /etc/conf/mdevice.d/psm_acpi /etc/conf/pack.d/acpi/Driver.o /etc/conf/pack.d/atup/Driver.o /etc/conf/pack.d/audit/Driver.o /etc/conf/pack.d/ccnv/Driver.o /etc/conf/pack.d/fs/Driver.o /etc/conf/pack.d/inet/Driver.o /etc/conf/pack.d/kd/Driver.o /etc/conf/pack.d/kdb/Driver.o /etc/conf/pack.d/kdb_util/Driver.o /etc/conf/pack.d/kma/Driver.o /etc/conf/pack.d/kma/space.c /etc/conf/pack.d/mod/Driver.o /etc/conf/pack.d/mps/Driver.o /etc/conf/pack.d/name/Driver.o /etc/conf/pack.d/nfs/Driver.o /etc/conf/pack.d/pci/Driver.o /etc/conf/pack.d/proc/Driver.o /etc/conf/pack.d/procfs/Driver.o /etc/conf/pack.d/psm_acpi/Driver.o /etc/conf/pack.d/psm_apic/Driver.o /etc/conf/pack.d/psm_cfgtables/Driver.o /etc/conf/pack.d/psm_msi/Driver.o /etc/conf/pack.d/sc01/Driver.o /etc/conf/pack.d/scodb/Driver.o /etc/conf/pack.d/sd01/Driver.o /etc/conf/pack.d/svc/Driver.o /etc/conf/pack.d/util/Driver.o /etc/conf/pack.d/v3compat/Driver.o /etc/conf/sdevice.d/psm_acpi /etc/copyrights/z_oss726 /etc/default/ssh-host-key-fingerprints /etc/expirewarning /etc/hw /etc/nfs /etc/pam.d/mail /etc/pam.d/other /etc/rc.d/ssh-host-key-fingerprints /etc/setclk /etc/setclock /hdboot/bootmsgs /osr5/usr/lib/libc.a /osr5/usr/lib/libc.so /osr5/usr/lib/libc.so.1 /osr5/usr/lib/libp/libc.a /sbin/md5 /sbin/nologin /sbin/sha /sbin/sha1 /sbin/sha256 /sbin/sha384 /sbin/sha512 /tcb/bin/auditmap /u95/bin/awk /u95/bin/comm /u95/bin/copy /u95/bin/cut /u95/bin/find /u95/bin/fold /u95/bin/hd /u95/bin/head /u95/bin/join /u95/bin/nawk /u95/bin/od /u95/bin/paste /u95/bin/pr /u95/bin/rm /u95/bin/sed /u95/bin/sort /u95/bin/split /u95/bin/tail /u95/bin/tftp /u95/bin/touch /u95/bin/uniq /u95/bin/use_builtin /u95/bin/wc /usr/adm/install/admin/check /usr/adm/install/bin/pkginstall /usr/adm/install/bin/pkgremove /usr/bin/copy /usr/bin/installf /usr/bin/man /usr/bin/md5 /usr/bin/pkgadd /usr/bin/pkgchk /usr/bin/pkginfo /usr/bin/pkgmk /usr/bin/pkgparam /usr/bin/pkgproto /usr/bin/pkgrm /usr/bin/pkgtrans /usr/bin/rm /usr/bin/sha /usr/bin/sha1 /usr/bin/sha256 /usr/bin/sha384 /usr/bin/sha512 /usr/bin/truss /usr/bin/whereis /usr/ccs/bin/what /usr/ccs/lib/libc.a /usr/ccs/lib/libc.so /usr/ccs/lib/libp/libc.a /usr/ccs/lib/libp/libc.so /usr/ccs/lib/libp/libc.so.1 /usr/include/CC/cstdio /usr/include/CC/iostream.h /usr/include/CC/yvals.h /usr/include/ctype.h /usr/include/dirent.h /usr/include/err.h /usr/include/fcntl.h /usr/include/float.h /usr/include/getopt.h /usr/include/inttypes.h /usr/include/limits.h /usr/include/locale.h /usr/include/math.h /usr/include/net/bpf.h /usr/include/net/if.h /usr/include/netdb.h /usr/include/pthread.h /usr/include/setjmp.h /usr/include/signal.h /usr/include/spawn.h /usr/include/stdarg.h /usr/include/stddef.h /usr/include/stdint.h /usr/include/stdio.h /usr/include/stdlib.h /usr/include/string.h /usr/include/strings.h /usr/include/sys/cdefs.h /usr/include/sys/clock.h /usr/include/sys/clock_p.h /usr/include/sys/kmem.h /usr/include/sys/mkdev.h /usr/include/sys/osocket.h /usr/include/sys/pathname.h /usr/include/sys/poll.h /usr/include/sys/privilege.h /usr/include/sys/psm.h /usr/include/sys/resource.h /usr/include/sys/sd01.h /usr/include/sys/sockio.h /usr/include/sys/stat.h /usr/include/sys/syscall.h /usr/include/sys/syslog.h /usr/include/sys/time.h /usr/include/sys/types.h /usr/include/sys/uadmin.h /usr/include/sys/unistd.h /usr/include/sys/user.h /usr/include/tcpd.h /usr/include/term.h /usr/include/time.h /usr/include/unistd.h /usr/include/utime.h /usr/include/varargs.h /usr/include/vm/kma_p.h /usr/include/wchar.h /usr/lib/drf/conframdfs /usr/lib/drf/drfram.proto /usr/lib/drf/mini_kernel /usr/lib/drf/prep_flop /usr/lib/libc.so.1 /usr/lib/libiaf.a /usr/lib/libiaf.so /usr/lib/libp/libthread.so.1 /usr/lib/libp/libthreadT.so.1 /usr/lib/libsocket.so.2 /usr/lib/libthread.so.1 /usr/lib/libthreadT.so.1 /usr/lib/locale/en/LC_MESSAGES/sco_pmd.cat /usr/lib/locale/es/LC_MESSAGES/sco_pmd.cat /usr/lib/lp/lpd/cancel /usr/lib/lp/lpd/lpmove /usr/lib/lpd /usr/lib/scoadmin/license/licenseMgr /usr/lib/scoadmin/msg/en/licenseMgr.cat /usr/lib/scoadmin/msg/es/licenseMgr.cat /usr/lib/scoadmin/msg/it/licenseMgr.cat /usr/lib/scoadmin/msg/ja/licenseMgr.cat /usr/man/cat1/md5.1 /usr/man/cat1/sha.1 /usr/man/cat1/sha1.1 /usr/man/cat1/sha256.1 /usr/man/cat1/sha384.1 /usr/man/cat1/sha512.1 /usr/man/cat1/whereis.1 /usr/man/cat2/clock_getres.2 /usr/man/cat2/clock_gettime.2 /usr/man/cat2/clock_nanosleep.2 /usr/man/cat2/clock_settime.2 /usr/man/cat2/nanosleep.2 /usr/man/cat3/arc4random.3 /usr/man/cat3/arc4random_buf.3 /usr/man/cat3/arc4random_uniform.3 /usr/man/cat3/err.3 /usr/man/cat3/err_set_exit.3 /usr/man/cat3/err_set_file.3 /usr/man/cat3/errc.3 /usr/man/cat3/errx.3 /usr/man/cat3/execvpe.3 /usr/man/cat3/getopt_long.3 /usr/man/cat3/getopt_long_only.3 /usr/man/cat3/memmem.3 /usr/man/cat3/mkdtemp.3 /usr/man/cat3/mkostemp.3 /usr/man/cat3/mkostemps.3 /usr/man/cat3/mkstemp.3 /usr/man/cat3/mkstemps.3 /usr/man/cat3/mktemp.3 /usr/man/cat3/posix_spawn.3 /usr/man/cat3/posix_spawn_file_actions_addclose.3 /usr/man/cat3/posix_spawn_file_actions_adddup2.3 /usr/man/cat3/posix_spawn_file_actions_addopen.3 /usr/man/cat3/posix_spawn_file_actions_destroy.3 /usr/man/cat3/posix_spawn_file_actions_init.3 /usr/man/cat3/posix_spawnattr_destroy.3 /usr/man/cat3/posix_spawnattr_getflags.3 /usr/man/cat3/posix_spawnattr_getpgroup.3 /usr/man/cat3/posix_spawnattr_init.3 /usr/man/cat3/posix_spawnattr_setflags.3 /usr/man/cat3/posix_spawnattr_setpgroup.3 /usr/man/cat3/posix_spawnp.3 /usr/man/cat3/strsep.3 /usr/man/cat3/verr.3 /usr/man/cat3/verrc.3 /usr/man/cat3/verrx.3 /usr/man/cat3/vwarn.3 /usr/man/cat3/vwarnc.3 /usr/man/cat3/vwarnx.3 /usr/man/cat3/warn.3 /usr/man/cat3/warnc.3 /usr/man/cat3/warnx.3 /usr/man/cat8/nologin.8 /usr/man/man1/md5.1 /usr/man/man1/sha.1 /usr/man/man1/sha1.1 /usr/man/man1/sha256.1 /usr/man/man1/sha384.1 /usr/man/man1/sha512.1 /usr/man/man1/whereis.1 /usr/man/man2/clock_getres.2 /usr/man/man2/clock_gettime.2 /usr/man/man2/clock_nanosleep.2 /usr/man/man2/clock_settime.2 /usr/man/man2/nanosleep.2 /usr/man/man3/arc4random.3 /usr/man/man3/arc4random_buf.3 /usr/man/man3/arc4random_uniform.3 /usr/man/man3/err.3 /usr/man/man3/err_set_exit.3 /usr/man/man3/err_set_file.3 /usr/man/man3/errc.3 /usr/man/man3/errx.3 /usr/man/man3/execvpe.3 /usr/man/man3/getopt_long.3 /usr/man/man3/getopt_long_only.3 /usr/man/man3/memmem.3 /usr/man/man3/mkdtemp.3 /usr/man/man3/mkostemp.3 /usr/man/man3/mkostemps.3 /usr/man/man3/mkstemp.3 /usr/man/man3/mkstemps.3 /usr/man/man3/mktemp.3 /usr/man/man3/posix_spawn.3 /usr/man/man3/posix_spawn_file_actions_addclose.3 /usr/man/man3/posix_spawn_file_actions_adddup2.3 /usr/man/man3/posix_spawn_file_actions_addopen.3 /usr/man/man3/posix_spawn_file_actions_destroy.3 /usr/man/man3/posix_spawn_file_actions_init.3 /usr/man/man3/posix_spawnattr_destroy.3 /usr/man/man3/posix_spawnattr_getflags.3 /usr/man/man3/posix_spawnattr_getpgroup.3 /usr/man/man3/posix_spawnattr_init.3 /usr/man/man3/posix_spawnattr_setflags.3 /usr/man/man3/posix_spawnattr_setpgroup.3 /usr/man/man3/posix_spawnp.3 /usr/man/man3/strsep.3 /usr/man/man3/verr.3 /usr/man/man3/verrc.3 /usr/man/man3/verrx.3 /usr/man/man3/vwarn.3 /usr/man/man3/vwarnc.3 /usr/man/man3/vwarnx.3 /usr/man/man3/warn.3 /usr/man/man3/warnc.3 /usr/man/man3/warnx.3 /usr/man/man8/nologin.8 /usr/sbin/brand /usr/sbin/crash /usr/sbin/nologin /usr/sbin/sco_pmd
----------------------------------------------------------
Copyright (c) 2019-2024 Xinuos, Inc. All Rights Reserved.