Problem
I would like to upgrade my OpenServer 6 Enterprise or OpenServer 6V system to OpenServer 6 Definitive.
Solution
Be aware that OpenServer 6 Definitive requires an OpenServer 6
Definitive license. Do not attempt the upgrade without this license.Before upgrading your OSR6 Enterprise or 6V system to
Definitive, make sure you have good backups. The upgrade
process is not reversible.1) If you have not already done so, you can download the OpenServer6 Definitive DVD ISO from our portal site:
https://portal.xinuos.com/-or-https://portal.xinuos.com/group/community/definitive2) Save the ISO to /tmp3) Verify the checksum matches the values contained in the corresponding md5 sum file in the same location.
4) Calculate the md5sum using the openssl command:
# openssl md5 /tmp/OpenServer6-Definitive-D2M0-CD1.iso
318baf0440eddf8eaf4afd3e6b4e9a355) Mount the ISO image using:# mount `marry -a /tmp/OpenServer6-Definitive-D2M0-CD1.iso` /mnt6) On some systems, there is a situation which can cause problems with the upgrade script, run this command to prevent that from happening:
# find /usr/lib/locale -name licenseMgr.cat -exec rm {} \;7) Start the upgrade:# cd /mnt
# ./upgrade.sh8) When prompted apply the OpenServer 6 Definitive license. If the
license was not applied at this time, you may need to apply it in
Single-User Mode.9) Once the upgrade is complete, shutdown and reboot your system.
NOTES: It is advised to accept all defaults during the upgrade process, if some software is installed which is unwanted, remove it after the upgrade is finished.
See also
TA127889 - Selecting MMDF during installation of OpenServer 6 Definitive, results in a hang at the end of the install after HBA drivers are installed.
TA127888 - How do I switch from Sendmail to MMDF using OpenServer 6 Definitive?
OpenServer 6 Definitive Getting Started Guide