Problem
When MMDF is chosen as the Mail Transport agent during the installation of OpenServer 6 Definitive, the installation hangs near the end, after the HBA drivers are installed.
Aborting and rebooting at this point results in a panic indicating that the root disk can not be found.
Cause
The ISL process is trying to verify Sendmail, even though it is not installed when MMDF is chosen.
Solution
This issue has been reported to Xinuos Engineering.
If you are in the hung state, you can get the installation to complete by switching the console to VT0> by using <CTRL><ALT><ESC>
Hit return to get a new prompt.
Use `ps -ef` to see the current processes.Take note of the PIDs for the 'custom' processes.
Use `kill -9 <PID_list>` to kill the 'custom' processes.Check the process table again and see if there any additional 'custom' processes and if so kill those also.
At this point the installation should continue and
complete. Switch back to the ISL screen by using
<CTRL><ALT><F1>When the system shuts down remove the media and reboot.
If you have already rebooted and had the system panic, you
will need to re-install. To avoid taking the steps above
on the re-install, you can choose Sendmail and then follow
the steps in TA 127888 to switch from Sendmail to MMDFTA127888 - How do I switch from Sendmail to MMDF using OpenServer 6 Definitive?
See also
TA127888 - How do I switch from Sendmail to MMDF using OpenServer 6 Definitive?