Problem
How do I configure Dynamic Host Configuration Protocol (DHCP) on SCO OpenServer 5 and UnixWare7?
Solution
Follow these steps:1. Decide on which IP addresses you want to be allocated to DHCP clients. These IP addresses should be unused by any other machines.
2. Run SCOadmin Address Allocation Manager.3. Choose:View -> Pool Definition4. Configure a pool <poolname> with the IP addresses you wish to allocate. (A pool is the same as a scope, in Microsoft terminology.)
5. Start the AAS server:Server -> Start Server6. Run SCOadmin DHCP Manager.7. Choose:View -> Subnets8. Choose:Entry -> AddEnter the subnet and mask addresses, for example, for a class C address 150.126.20.0:
subnet: 150.126.20.0mask: 255.255.255.0<poolname>lease period (for example, 1 day)GenericExamples to set would be:3 - router (The IP address of your gateway) 6 - dns_servers (The IP addresses of your nameservers) 15 - domain (The FQDN for your server)
9. Check /etc/inetd.conf. It should contain the uncommented line:
bootps dgram/i udp wait root /etc/dhcpd dhcpdIf necessary, restart TCP/IP, the inetd daemon or reboot for that change to take effect, if required.
10. Configure your DHCP clients.For example, to set up a UnixWare 7.1.x system as a DHCP client:
a. Run SCOadmin Network Configuration Manager.b. Add a LAN adapter, or choose Modify Protocol if the LAN adapter is already configured.
c. In the Internet Protocol Configuration window, select DHCP Client, and click OK.
11. Reboot your DHCP clients. They should pick up their IP addresses from the pool you defined.
Note: The IP addresses used in this article are for example purposes only.
NOTE: Should there be a timeout delay in obtaining DHCP information check
to see if the DHCP server is using DNS in it's /etc/resolv.conf file
and is able to access the nameservers configured.NOTE: It is recommended to use the GUI version of "scoadmin dhcp" to
configure the options as trying to add Vendor and User classes within
"scoadmin dhcp" from the command prompt may cause "scoadmin" to
crash. See also
ta110030, "SCOHelp for SCO OpenServer 5.0.5 refers to DHCP man pages that don't exist."
ta107696, "Is DHCP supported in SCO OpenServer Release 5.0.4?"
ta110134, "Configuring a Windows 95 PC as a DHCP client to UnixWare 7."
The man pages are available at:OpenServer6
-----------
http://osr600doc.xinuos.com/en/NET_tcp/aasN.intro.html
http://osr600doc.xinuos.com/en/NET_tcp/dhcpN.intro.htmlOpenServer5:
-----------
http://docsrv.sco.com:507/en/man/html.ADMN/aasd.ADMN.html
http://docsrv.sco.com:507/en/NetAdminG/dhcpN.ref.htmlUnixWare7:
---------
http://uw713doc.sco.com/en/NET_tcpip/aasT.conf.html
http://uw713doc.sco.com/en/NET_tcpip/dhcpT.conf.html