Problem
I want to use a remote host as a fontserver for my SCO OpenServer
machine. How do I configure my machine to accomplish this? Solution
To accomplish this, you must have the fontserver configured and running on the remote host and be using scologin on the client. The following steps outline the process:
1. Log in to the client (recipient of the fonts) as root.
2. cd to /usr/lib/X11/scologin and edit the file Xservers. You should see something similar to this:
#
# server options set by scologin
#
# This line will start a server named :0 on tty02:0 local /usr/bin/X11/X :0 -crt /dev/tty02# This line would start scologin on the X-terminal called ravioli
# which does not support XDMCP. If the terminal supports XDMCP
# then don't put and entry in this file.
# ravioli:0 foreign3. Change this line::0 local /usr/bin/X11/X :0 -crt /dev/tty02To this::0 local /usr/bin/X11/X :0 -crt /dev/tty02 -fp tcp/machinename:7000where "machinename" is the name of the host running the fontserver. By default, the port number the fontserver "listens" on is 7000. If the host running the fontserver is set to some other port number, then use that port number in place of 7000. Save your changes.
4. If you have an existing X session running, exit this session.
5. Stop and then restart scologin for the changes to take effect:
# scologin stop
# scologin enable6. Your system configuration is complete. To verify that you
are connected to the remote host's fontserver, enter this command:ps -ef | grep machinenamewhere "machinename" is the name of the remote host running the
fontserver. You should see output similar to this:root 19022 19020 0 12:58:32 pts000 00:00:01
/usr/bin/X11/X :0 -crt /dev/tty02 -fp tcp/machinename:7000
-auth /usr/lib/X11/scol See also
ta104973, "'/etc/fontserv start' returns 'TCP/IP must be running before starting the font server'."