Technical article 105093

How to determine which patches or supplements have been applied to OpenServer 5.0.0.

OpenServer 5.0.0

Written · Last revised

Problem

I need to determine whether Release Supplements 5.0.0c, 5.0.0d, and/or the SCO OpenServer Networking Supplement Release 1.0.0 have been installed on my SCO OpenServer Release 5 system. These are sometimes referred to as "rs500c", "rs500d", and "net100a", respectively.

NOTE:     It is essential that you have one of the two Release
          Supplements (rs500c or rs500d) applied to your system.

Solution

To determine which patches have been applied to your system, follow these steps:

1. Bring up "scoadmin software manager" (also available as "custom" or through the System Administration icon on the desktop).

2. Highlight the applicable OpenServer product.
3. Select "Software->Examine->AppliedPatches" to determine which
   patches are installed on the system.  Compare the entries
   displayed with the following table to determine which patches
   have been applied.  Note that a "No Patches Applied" response
   indicates that none of the patches have been applied.
LIST OF OpenServer 5.0.0 PATCH IDs
==================================
Patch Level C (from "Release Supplement including ATAPI BTLD" diskette):
-------------
5.0.0c           NFS Version 2.0.0 Release Supplement
5.0.0c           TCP/IP Version 2.0.0 Release Supplement
5.0.0c           Network Drivers Release 5.0 Release Supplement
5.0.0c           Unix Version 5.0.0 Release Supplement
Patch Level D (from websco:~/Supplements/rs500d directory):
-------------
rs.nfs200.1.0.a  NFS Version 2.0.0 Release Supplement
rs.tcp200.1.0.a  TCP/IP Version 2.0.0 Release Supplement
rs.lli500.1.0.a  Network Drivers Version 5.0.0 Release Supplement
rs.Unix500.1.0. Unix Version 5.0.0 Release Supplement
Networking Supplement (from websco:~/Supplements/net100 directory):
---------------------
rs.nfs200.2.0.a  NFS Version 2.0.0: Networking Supplement Release 1.0
rs.tcp200.2.0.a  TCP/IP Version 2.0.0: Networking Supplement Release 1.0
rs.Unix500.2.0.a UNIX Version 5.0.0: Networking Supplement Release 1.0
Notes:  The SCO OpenServer Host System will not have entries
        for NFS, TCP/IP or Network Drivers.
NOTES:    Release Supplement 5.0.0c (rs500c) is shipped in the
          SCO OpenServer Release 5 product package, and is labeled
          "SCO OpenServer Release Supplement including ATAPI BTLD".
Release Supplement 5.0.0d (rs500d) is available for downloading
from SCO's Online Services.  rs500d supersedes rs500c; therefore,
rs500c must be rolled back before rs500d is applied.
The Networking Supplement (net100a) is available for downloading
from SCO's Online Services.  Release Supplement 5.0.0d must be
installed before the Networkign Supplement 1.0.0 is installed.

To install a patch or supplement, take these steps:

1. Use the Software Manager ("scoadmin software manager" or "custom") to highlight your SCO OpenServer Release 5 base product.

2. Select "Software->PatchManagement". It is recommended that you both "Load" and then "Apply" the patches. "Load" simply loads the patch to your machine in a holding area, whereas "Apply" actually updates the various programs.

Note: If you want to install rs500d, and you already have rs500c applied, you must first rollback the rs500c patches.

See also

TA104875: "What is the difference between loading and applying a patch?"

From the Xinuos technical article database, record 105093. Reproduced with permission. The original is at www.sco.com/ta/105093, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.