Technical article 111181

How to see if a product is installed if it didn't use custom.

OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I installed a package that did not use the custom command (the
same as the software manager program) to install.  How do I see
if it successfully installed?

Solution

Software packages not installed via custom typically use the
pkgadd command to install. To see if a particular package
is installed, type:
pkginfo -i pkgname

where "pkgname" is the correct name for the package.

To find the correct name, run this command:

pkginfo

The second column is the name of the package.

- OR -
Run:
pkginfo -l | more
This will show the verbose output of all packages known to
pkginfo. The first line of each package listed is:
PKGINST: xxxx

where "xxxx" is the package name installed on the system. Look for a description below the package name that matches the package you are looking for.

NOTE: Some products (like the UDK development environment) install multiple packages on the system.

Use the package name you find with the 'pkginfo -i' command.
If the package is recognized by the system, it will print a
line with the package information, otherwise  a "not found"
message is printed.
Be aware that it is possible, if there is a problem, to see
the package with the  'pkginfo -l' or 'pkginfo' commands but
not with pkginfo -i. Only 'pkginfo -i' will definitively show
whether the package is recognized by the system.
NOTE:     Although it is not good installation practice, it is possible
          to install packages with simple techniques such as tar archives.
          These installations will not show in either the software manager
          OR with the pkginfo method.

See also

For an exception to the rule, see ta111009, "How do I install
the UnixWare and OpenServer Development Kit (UDK) on my SCO
OpenServer Release 5 system?" for more information on the
installation of the UDK. It does not use pkgadd explicitly
(it installs via a shell script), but it is visible with the
pkginfo command.

From the Xinuos technical article database, record 111181. Reproduced with permission. The original is at www.sco.com/ta/111181, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.