Technical article 112821

I can't see the root filesystem as being mounted when I use the 'mount' command.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

The root filesystem does not show as mounted in the mount table, or when using the 'mount' or 'df -v' commands. Even in single user mode the root filesystem does not show as being mounted.

Solution

Of the many causes of this behavior, an especially noteworthy cause is that the bin account is disabled.

If you experience this problem, follow the steps below to enable the bin account, using the Account Manager:

NOTE: This procedure requires root authorization.

1. Open the Account Manager using the Graphical Interface or the Character Interface.

2. Select the user account you want to enable or unlock.

3. Click on the Users menu.

4. Click on the Login Controls submenu and then on the Unlock option.

NOTE: If an account is locked it will have a lock or a '#' in front of the account name.

5. Reboot the system.

Now the root filesystem should appear as mounted in the mount table. To check the mount table, use the mount(ADM) command.

See also

mount(ADM), umount(ADM), df(C), divvy(ADM), bcheckrc(ADM),
devnm(C), setnmt(ADM), mnttab(F)
ta105411, "File System Repair Utility for SCO OpenServer 5.0.0,
5.0.2, 5.0.4."
ta106481, "df(C) and mount(ADM)reports erroneous information."

ta105598, "mount(ADM) shows root filesystem not mounted; Backup Manager won't back up root filesystem."

From the Xinuos technical article database, record 112821. Reproduced with permission. The original is at www.sco.com/ta/112821, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.