Technical article 125385

I get the following error message in the /usr/adm/syslog, "WARNING: apic: cannot find interrupt information for PCI device (device 11/4/0)"

OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I get the following error message in the /usr/adm/syslog file:

WARNING: apic: cannot find interrupt information for PCI device (device 11/4/0)

At the same time I experience problems with other devices configured on the system such as tape drives and network cards.

Some of the symptoms are:

When trying to read/restore from a cpio tape backup I get the following symptoms:

- The tape hangs when trying to write to it or read from it and after a while an error message appears "/dev/rStp0: cannot open".

- Other times the "tape status" command will return an error "Cannot open device /dev/xct0: device busy" even though the tape is not being used at the time.

- Network card does not work

Cause

This error message indicates that there is a problem with the IRQ assignment for PCI devices in the system BIOS.

Solution

To correct this problem you will have to go into the system BIOS and
set the correct mode for the MPS table. When installing OpenServer
5.0.x on a Compaq system the "MPS table mode" must be set to "Full
Table Mapped".

From the Xinuos technical article database, record 125385. Reproduced with permission. The original is at www.sco.com/ta/125385, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.