Technical article 105890

I get the message "prc_sync: script (P86sendmail) failed to complete 120 seconds."

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I am getting the following message when trying to boot to multiuser mode:

prc_sync: (P86sendmail) failed to complete in 120 seconds.

Solution

If you are using DNS and this system is not the nameserver,
make sure the /etc/resolv.conf file exists and is configured
correctly. The following entry should be included under the
domain entry:
hostresorder local bind

So, an example entry would look similar to this:

domain makebelieve.maybe.com hostresorder local bind search uss.maybe.com maybe.com london.maybe.com nameserver 199.168.0.0

Also make sure the /etc/hosts entries are correct. The hostresorder line says to use the /etc/hosts file to resolve the name to ip (or vice versa) first, and if it cannot be resolved there, query the nameserver.

Also, make sure you networking NiC is configured correctly and check the date is correct on the server.

From the Xinuos technical article database, record 105890. Reproduced with permission. The original is at www.sco.com/ta/105890, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.