Technical article 116827

I get the message "Unable to configure remote line printing failed to replace local attributes of local printer lpd" when trying to add a remote printer.

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I get the message "Unable to configure remote line printing failed to replace local attributes of local printer lpd" when trying to add a remote printer or root can print but other users cannot.

Cause

It is likely that a previous attempt to install remote printing has failed.

Solution

Before starting, you may wish to make an additional copy of the existing files:

# mkdir -p /local/lpd/local
# mkdir -p /local/lpd/remote
# cd /usr/lpd/local
# cp * /local/lpd/local
# cd /usr/lpd/remote
# cp * /local/lpd/remote

To rectify, the problem perform the following steps:

Run "mkdev rlp" and select "r" to remove rlp and answer as required to each of the questions.

It is recommended that you do not to delete the /etc/printcap file or the directory:

/usr/spool/lpd

Once removed, run "mkdev rlp" again and select "i" to install rlp and again answer as required to each of the questions.

You should then be able to run "scoadmin printers" to add new remote printers.

See also

ta102819, "Set up lpd (remote) printing; can't print locally and/or remotely."

ta109737, "My network printers configured with lpd are missing in Printer Manager."

ta112842, "How do I print to a Lexmark printer server using SCO OpenServer 5.0.6?"

From the Xinuos technical article database, record 116827. Reproduced with permission. The original is at www.sco.com/ta/116827, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.