Technical article 112842

How do I print to a Lexmark printer server using SCO OpenServer?

OpenServer 6.0.0OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

What do I need to configure to print to a Lexmark Print Server using SCO OpenServer?

Solution

First, add the IP address of the printer to /etc/hosts.

Next, check network connectivity by pinging the printer name.

The printer name must be the same name as defined on the Lexmark Printer server.

Run the command:
scoadmin "Printer Manager"
Select "Printer".
Select "Add Remote".
Select "UNIX".
If the "Remote Printing Service" is not present (rlp), you
will be prompted to add it.  Select "OK" to add the service.

For the "Host" name, enter the name of the printer.

For the Printer Name, put the name of the printer for port 0, for example:

lexmark0

Additional ports will have a numeric extension, for example:

lexmark1

Do not try to use the "Select" command to browse the printer as this will not be able to communicate with the Lexmark printer. This tool is expecting another Unix server to be present.

De-select the Extended remote printing protocol (only available if
printer host is running SCO OpenServer Release 5 or above).  If
you select this by mistake, it can be removed manually by taking
out the ":ex" entry in /etc/printcap.

You can then press "OK" to add the printer.

Once the printer is added, select "Host", then select "Exit".

You should now be able to print to the printer.  You may need
to add carriage return line feeds to the end of each line using
the "addcr" command.  Such as:
:
# addcr/addcrff - filters to add CARRIAGE RETURN to LINEFEED in text
#
# Usage:        addcr [file]
# or:           addcrff [file]
#
# where:        file - is file name. Defaults to stdin
#
#       addcr adds CR to each LF
#       addcrff also appends a FORMFEED at end of input
#
# eg:   addcr my.file | lp
#       addcrff < my.file > /dev/lp
#
# Portability:
#       Should run on any version of shell
CR=`echo | tr '\012' '\015'`
sed "s/$/$CR/" $*
case "$0" in
        *addcrff) echo | tr '\012' '\014';;
esac
NOTE:     Once the "rlp" service has been installed take care when using
          the "custom -V quick" or "integrity" commands as this will report
          errors for the files "lp", "lpstat", "lpmove" and "cancel".
This is not correct as these files now have different permissions
as they have been copied in from /usr/lpd/remote and "custom" is
comparing against the original file permissions.  These files were
copied into /usr/lpd/local when the Remote Printing Service (rlp)
was added.
NOTE:     It would not be possible to have a different name other than the
          printer queue name in /etc/hosts or have a class of printer with a
          pseudo-name. The name of the printer must match the name of the
          queue.
NOTE:     To add the filter permanently to OpenServer 5.0.6 you can add it to
          /etc/printcap as:
# Remote Line Printer (BSD format)
p-supadm:\
:lp=:rm=p-supadm:rp=p-supadm:sd=/usr/spool/lpd/p-supadm:mx#0:
of=/local/bin/lp_addcr:
Where /local/bin/lp_addcr is in the format:
#!/bin/sh
exec /local/bin/addcr

and /local/bin/addcr is the script as defined above.

This will automatically filter the text file and add carriage returns.

Ensure there is sufficient permission for "lp" to access these files.

TROUBLESHOOTING:
---------------

- Not adding the line in /etc/hosts can result in the error message:

UNABLE TO GET HOSTNAME FOR REMOTE MACHINE

when trying to print as /etc/printcap "rp" can't resolve it.

- I've deleted the printer using /usr/lib/lpadmin -x and it's still there in "scoadmin printer".

It is recommended to use "scoadmin printer" to delete the printers from the lp print queue.

- I've added the printer but I can't print, says it doesn't exist:

UX:accept: ERROR: Destination "pcanon" is unknown to the LP print service.

Try:
# /usr/lib/lpshut
# /usr/lib/lpsched
# enable <printer>
# accept <printer>

See also

ta107426, "How to set up rlp after removing and re-installing the LPR package."

ta107448, "Get error "UX:LP:ERROR: Can't establish contact with
lp print services."

ta107455, "Root can print locally but users cannot. Remote printing is configured."

ta107488, "Invoke lp as non-superuser, reports "lp: cannot execute 'lp' command."

From the Xinuos technical article database, record 112842. Reproduced with permission. The original is at www.sco.com/ta/112842, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.