Problem
I am getting the above warning message after configuring my SCSI tape drive.
Solution
During the tape configuration, you are asked if you wish to change
the default tape boot string. You can choose to leave the default
setting and quit, but if you enter a new string which is incorrect,
then the following message occurs:WARNING: SCSI boot option(s) ignoreThe boot string gets written in the /etc/default/boot file. Enter this file and edit it to correct the changes:
cd /etc/defaultUsing vi, or any other editor, change the DEFBOOTSTR.
Make sure that you have DEFBOOTSTR=hd(40)unixNOTE: For OpenServer 5.0.x, the DEFBOOTSTR entry should be this:
DEFBOOTSTR=hd(40)unix swap=hd(41) dump=hd(41) root=hd(42)Remove any additional strings that you entered while configuring
the tape drive. If you know the correct string, you may add it
here or just leave it with only hd(40)unix.If the boot string is corrupted, you may have problems during the
boot up and the system may panic. In that case, boot from
unix.old, the previous kernel, and then edit the /etc/default/boot
file.At the Boot: prompt, type:unix.oldThis will load the previous kernel and you should now be able to
get in. Remove all extra strings from DEFBOOTSTR until only
hd(40)unix remains. Reboot the machine and you should be able
to get in without any warning messages.NOTE: Errors in /etc/default/boot can result in the following error
appearing at boot time and in the /usr/adm/syslog:WARNING: SCSI boot option(s) ignored: Bad parameter count See also
The manuals on boot(HW).