Technical article 114964

If I replace my video card with a card of the same type or I am using MIT the video card reverts to VESA.

OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I have configured a video card, for example, an ATI RAGE 128, but if I replace it, or if I am using the Mass Installation Toolkit (MIT) to generate images of my server and install on target servers using the same video card configuration in the same PCI slot, the video configuration reverts to VESA-Mode.

Cause

Unlike UnixWare 7 and Open UNIX 8, OpenServer does not autodetect the video card.

The PCI information on the video card may be different from information on the original video card. This can be determined by using the "/etc/hw -v" command. You may find that the you have different AOF-signatures in /usr/lib/vidconf/AOF/.sig file.

For example, BIOS=06722 (on the master) and BIOS=14120 (on the target).

Solution

Either re-configure the video card using "scoadmin video", "mkdev graphics" or run the following in a script:

rm -f /usr/lib/vidconf/AOF/.sig
/usr/lib/vidconf/scripts/grafinit.sh sig

See also

https://ftp.scoexpert.com/drivers/OSR505/graphics/

From the Xinuos technical article database, record 114964. Reproduced with permission. The original is at www.sco.com/ta/114964, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.